Kenwood TK-3301E User Manual Page 1

INSTRUCTION MANUALMODE D’EMPLOIMANUAL DE INSTRUCCIONESMANUALE DI ISTRUZIONIBEDIENUNGSANLEITUNGGEBRUIKSAANWIJZINGKULLANIM KILAVUZUTK-3301UHF FM TRANSCE

1CONTENTSUNPACKING AND CHECKING EQUIPMENT ... 1PREPARATION ... 2ORIENTAT

2PREPARATIONINSTALLING/ REMOVING THE BATTERY PACK◆ Do not short the battery terminals or dispose of the battery by fire.◆ Never attempt to remove th

3INSTALLING THE BELT CLIPIf necessary, attach the belt clip using the two supplied M3 x 8 mm screws.Note: If the belt clip is not installed, its moun

4INSTALLING THE OPTIONAL SPEAKER/ MICROPHONE (OR HEADSET)1 Insert the speaker/ microphone (or headset) plugs into the speaker/ microphone jacks.2 A

5Charging slot Indicator3 Slide a battery pack or a transceiver equipped with a battery pack into the charging slot of the charger.• Make sure the m

6ORIENTATIONBattery pack Channel selector Rotate to change the operating channel.• To change the operating frequency or QT/DQT settings of a channel

7 Side 1 key Press to activate its programmable function. The default setting is Calling Alert.• For function descriptions and details on how to c

8BASIC OPERATIONS1 Turn the Power switch/ Volume control clockwise to switch the transceiver power ON.• A beep sounds if enabled by your dealer.2 P

9VOICE OPERATED TRANSMISSION (VOX)VOX operation allows you to transmit hands-free. VOX can only be used if you are using a supported headset. This fu

10BACKGROUND OPERATIONSTIME-OUT TIMER (TOT)The Time-out Timer prevent callers from using a channel for an extended duration. If you continuously tran

TK-3301UHF FM TRANSCEIVERINSTRUCTION MANUALENGLISHNOTIFICATIONThis equipment complies with the essential requirements of Directive 1999/5/EC.This equi

11CHANNEL SETUP MODEThis transceiver allows you to reprogram each of the channels with different frequencies and QT (Quiet Talk)/ DQT (Digital Quiet T

12CHANNEL OPERATING FREQUENCIESTo change the operating frequency of a channel:1 With the transceiver power OFF, press and hold the PTT switch and Sid

13Table NumberOperating FrequencyTable NumberOperating Frequency0OFF1446.00625 MHz5446.05625 MHz2446.01875 MHz6446.06875 MHz3446.03125 MHz7446.08125 M

144 Press and release the PTT switch, then rotate the Channel selector to your desired channel.• Upon pressing and releasing the PTT switch, a beep

15Tone NumberQT/DQT SettingTone NumberQT/DQT SettingTone NumberQT/DQT Setting167.0 Hz14107.2 Hz27D132N271.9 Hz15110.9 Hz28D155N374.4 Hz16114.8 Hz29

16CHANNEL CONFIRMATION MODETo confirm your channel settings:1 With the transceiver power OFF, press and hold the PTT switch while turning the transce

17KEY ASSIGNMENT MODEThis transceiver allows you to reprogram the Side 1 and Side 2 keys with any of the functions listed in the table below. Explanat

18To change the functions of the Side 1 and Side 2 keys:1 With the transceiver power OFF, press and hold the Side 1 and Side 2 keys while turning the

19PROGRAMMABLE FUNCTIONS Calling Alert (Side 1 key default)Calling alert tones help identify yourself to party members and inform them that you are

20 ScanPress this key to start scanning the transceiver channels.Priority Scan: The Priority channel is a channel that is given first priority to w

Thank YouWe are grateful for your purchase of this Kenwood product and welcome you to the Private Mobile Radio service (PMR 446). PMR is a mobile com

21TROUBLESHOOTING GUIDEProblem SolutionCannot turn the transceiver power ON.• The battery pack may be dead. Recharge or replace the battery pack.

22OPTIONAL ACCESSORIES• KMC-17 (Speaker/ microphone)• KMC-21 (Speaker/ microphone)• KHS-1 (Headset)• KHS-21 (Headset)• KNB-45L (Li-ion battery pack)•

iNotices to the User◆ Government law prohibits the operation of unlicensed radio transmitters within the territories under government control.◆ Ille

iiPrecaUtioNs• Do not charge the transceiver and battery pack when they are wet.• Ensure that there are no metallic items located between the transc

iiiTurn the transceiver power off in the following locations:• In explosive atmospheres (inflammable gas, dust particles, metallic powders, grain pow

ivInformation concerning the battery pack:The battery pack includes flammable objects such as organic solvent. Mishandling may cause the battery to r

v• Use only the specified charger and observe charging requirements! If the battery is charged in unspecified conditions (under high temperature over

vi• Do not touch a ruptured and leaking battery! If the electrolyte liquid from the battery gets into your eyes, wash your eyes with fresh water as s