Kenwood eXcelon KDC-X792 User Manual download pdf (Page 19)

English

Other Functions

Activating Security Code

⁄

• You can set the Security Code with a 4 digit number of your

choice.

• The Security Code cannot be displayed or referenced. Make

a note of the Security Code and treasure it up.

1 Select Security Code item during Menu

mode (In Standby mode)

“Security Set” is displayed.

For how to select Function Control items, refer to

<Function Control> (page 6).

2 Enter Security Code mode

Press the Control knob for at least 1 second.

When “Enter” is displayed, “SECURITY SET” is also

displayed.

3 Enter Security Code

Operation type Operation

Select the digits to enter Push the Control knob towards right

or left.

Select the Security Code

numbers

Turn the Control knob or push it

towards up or down.

4 Confirm the Security Code

Press the Control knob for at least 3 seconds.

When “Re-Enter” is displayed, “SECURITY SET” is also

displayed.

5 Do the step 3 through 4 operation, and reenter

the Security Code.

“Approved” is displayed.

The Security Code function activates.

⁄

• If you enter the wrong Code in steps 3 through 4, repeat

from step 3.

6 Exit Security Code mode

Press the [FNC] button.

Entering Security Code

The Security Code is required to use the audio unit

when the unit is first used after removed from the

battery power source or the Reset button is pressed.

1 Turn the power ON.

2 Do the step 3 through 4 operation, and enter

the Security Code.

“Approved” is displayed.

Now, you can use the unit.

Deactivating Security Code

To deactivate the Security Code function.

1 Select Security Code item during Menu

mode (In Standby mode)

Select the “Security Clear” display.

For how to select Function Control items, refer to

<Function Control> (page 6).

2 Enter Security Code mode

Press the Control knob for at least 1 second.

When “Enter” is displayed, “SECURITY CLEAR” is also

displayed.

3 Enter Security Code

Operation type Operation

Select the digits to enter Push the Control knob towards right

or left.

Select the Security Code

numbers

Turn the Control knob or push it

towards up or down.

4 Press the Control knob for at least 3 seconds.

“Clear” is displayed.

The Security Code function deactivates.

5 Exit Security Code mode

Press the [FNC] button.

⁄

• If a wrong security code is entered, “Error” is displayed.

Enter a correct security code.

B64-4048-00_00.indb 19B64-4048-00_00.indb 19 08.2.5 4:22:46 PM08.2.5 4:22:46 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 115 116

Comments to this Manuals

No comments

Kenwood eXcelon KDC-X792 User Manual Page 19

Comments to this Manuals

Related products and manuals for Car speakers Kenwood eXcelon KDC-X792