Kenwood TK-5910 User Manual download pdf (Page 23)

ScAn progrAmming <TK-5710/ TK-5710h/ TK-5810/ TK-5810h only>

Note: Scan programming is only available when using Conventional operation.

■ Conventional Operation

If Scan Type has been programmed for Conventional operation, you are able

to reprogram your scan list.

1 Press the key programmed as Scan Program.

• The (KCH-14 ) or

SCAN

(KCH-15) icon appears on the display and blinks.

2 Press the GRP and keys or rotate the CH control to select the zone

and channel you will add to or remove from the Scan list.

• Press the PF 2 key to toggle between Zone Select and Channel Select.

3 Press the PF 4 key to add or remove the selected zone or channel to/ from

the scan list.

• The zone add indicator (KCH-14: / KCH-15: )/

channel add indicator (KCH-14:

/ KCH-15: ) will

appear on the display when the selected channel is added to the scan sequence.

4 Press the PF 1 key to exit scan programming.

If the Priority channel has been set as Operator Selectable by your dealer, you

are able to reprogram the Priority mode as well.

1 Press the key programmed as Scan Program.

• The (KCH-14) or

SCAN

(KCH-15) icon appears on the display and blinks.

2 Press and hold the PF 3 key to edit the Priority channel.

3 Press the GRP and keys or rotate the CH control to select the

channel you will set or unset as Priority.

4 Press the PF 4 key to toggle the selected channel between Priority and

Normal.

• “P1”, “P2”, or “PP” appears on the sub-display when Priority mode is selected.

5 Press the PF 3 key again to set the new channel setting.

6 Press the PF 1 key to exit scan programming.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

Kenwood TK-5910 User Manual Page 23