Kenwood TK-5910 User Manual Page 19
- Page / 44
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
13
■ Making Group Calls (P25)
Channels programmed for Conventional P25 and Trunking P25 operation
already have a Group ID assigned. For these channels, simply press and hold
the PTT switch to make the call.
• On Trunking channels, if the traffic channel is busy, a busy message appears and
the busy tone sounds. Release the PTT switch and wait for the channel to become
free. When the traffic channel becomes free, a proceed tone sounds.
Otherwise, if a key has been programmed with Talkgroup (Conventional P25
only), you can select a group ID from the list to make a call to those parties.
To select a group ID:
1 Press the key programmed as Talkgroup.
2 Press the GRP and keys or rotate the CH control to select a group
ID/name from the list that has been pre-entered into your transceiver.
• The target group ID/name appears on the display.
3 Press the PF 1 key to accept the group ID/name.
4 Press and hold the microphone PTT switch to make the call.
• Speak into the transceiver as you would during a normal transmission.
■ Making Individual Calls (P25)
If a key has been programmed with Individual, you can make calls to
specified persons.
1 Press the key programmed as Individual.
2 Press the GRP and keys or rotate the CH control to select a unit ID
from the list that has been pre-entered into your transceiver.
• Alternatively, you can directly enter a unit ID by using a DTMF keypad.
• The target unit ID/name appears on the display.
3 Press and hold the microphone PTT switch to make the call.
• Speak into the transceiver as you would during a normal transmission.
• On Trunking channels, a ringing tone will sound and the display will alternate
between the called unit ID/name and “CALLING”.
4 On Trunking channels, to end the call, press the PF 1 key or the DTMF #
key.
- TK-5710H 1
- TK-5810H 1
- Terminal Description 2
- Thank You 3
- Models Covered bY This Manual 3
- PreCauTions 4
- CONTENTS 5
- Supplied AcceSSorieS 7
- PREPARATION 8
- GETTING ACQUAINTED 10
- Kch-14 diSplAy 11
- SCAN OPT OSTA B CMON 12
- TK-5710h/ TK-5810h reAr pAnel 14
- PROGRAMMABLE FUNCTIONS 15
- BASIC OPERATIONS 17
- TrAnSmiTTing 18
- SelecTing A Zone And chAnnel 18
- ■ Making Group Calls (P25) 19
- TemporAry chAnnel locKouT 21
- ScAn reverT 22
- ■ Conventional Operation 23
- • The (KCH-14 ) or 24
- Key FuncTionS 25
- SelcAll (SelecTive cAlling) 26
- STATuS meSSAge 26
- ■ Transmitting 27
- ■ Receiving 27
- ShorT meSSAgeS 28
- AuTodiAl 29
- TRUNKING CALLS 30
- EMERGENCY CALLS 31
- SCRAMBLER (FM) 32
- / ENCRYPTION (P25) 32
- ASSword proTecTion 33
- SIGNALING 34
- ■ 2-tone Signaling 35
- ■ DTMF Signaling 35
- ■ FleetSync Signaling 35
- KCH-14 Display: 36
- KCH-15 Display: 36
- ADVANCED OPERATIONS 37
- High Mid Low Off 38
- BACKGROUND OPERATIONS 41
- SiTe TrunKing 42
- ■ Auto Recording 43
- ■ Voice Memos 43
- ■ Auto Reply Message 44
- ■ Playback 44
Related products and manuals for Boating Accessories Kenwood TK-5910
(23 pages)
(8 pages)
(8 pages)
Boating Accessories Kenwood TS-480HX User Manual
(104 pages)
(104 pages)
Xone podręczniki
Wykaz produktów Xone zawiera 4 instrukcje obsługi i przewodniki dla 4 modeli w 2 typu urządzeń
Comments to this Manuals