Kenwood TH-K2E - Discontinued User Manual download pdf (Page 33)

Transmitting

1 To transmit, hold the transceiver approximately 5 cm

(2 inches) from your mouth, then press and hold

[PTT] and speak into the microphone in your normal

tone of voice.

• The LED lights red and the bar-graph meter appears.

• If you press [PTT] while you are outside of the

transmission coverage, a high pitched error beep

sounds.

2 When you finish speaking, release [PTT].

Note: If you continuously transmit for longer than the time specified

in Menu No. 23 (default is 10 minutes) {page 94}, the internal time-

out timer generates a warning beep and the transceiver stops

transmitting. In this case, release [PTT] and let the transceiver cool

down for a while, then press [PTT] again to resume transmission

{page 116}.

■ Selecting an Output Power

Selecting a lower transmission power is the best way

to reduce battery consumption, if communication is

still reliable. You can configure different power levels

for transmission {page 95}.

Press [F], [PTT] to cycle between “ ” (high), “ ”

(medium), and “ ” (low).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 153 154

No comments

Kenwood TH-K2E - Discontinued User Manual Page 33