Kenwood KDC-2016 User Manual

KDC-4016KDC-2016©B64-1548-00 (MW)COMPACTDIGITAL AUDIOCD-RECEIVERINSTRUCTION MANUALKDC-4016/2016(M)Cover 02.5.15 10:12 AM Page 1

Switch the frequency step used in seeks. The factory defaultsare 50 kHz for FM and 9 kHz for AM.Turn the power off.Hold down buttons #1 and #5, then t

CD/External disc control featuresTemporarily have reception switched from stereo to mono toreduce multi-path noise when listening to the FM station.Th

Search forward or backward through the tracks on the disc untilyou reach the one that you want to listen to.Making a Reverse Track Search:Track Search

Successively play the beginning of each track on a disc untilyou find the track that you want to listen to.Starting the Track Scan :Press the SCAN but

Function of the KDC-4016Play the tracks on all the discs in the disc changer in randomorder.Press the M.RDM button to switch magazine random play onan

The supplied remote control unit is in its storage case.Do not set the remote on hot places such as above thedashboard.Loading and Replacing the Batte

• 4/¢ buttonsPress the 4 button to search through the tracks backward.Press the ¢ button to search through the tracks forward.• DISC buttons (for disc

— 17 —The use of any accessories except for those provided mightresult in damage to the unit. Make sure only to use theaccessories shipped with the un

English— 18 —Connecting Wires to TerminalsP.CONT.OUTANT. CONT.++++FRONT • LFRONT • RREAR • LREAR • R–––––+When only two speakers are being connected

— 19 —Make sure that the unit is installed securely in place. If the unit isunstable, it may malfunction (for example, the sound may skip).NOTEAccesso

— 2 —EnglishContentsBefore useSafety precautions ...3Handling Compact discs...

English— 20 —InstallationRemoving the hard rubber frame When the lower level is removed, remove the upper twolocations.2The frame can be removed from

— 21 —Accessory7Screwing the Faceplate on the Unit Never insert the taptite screw (ø4 × 16 mm) in any other screwhole than the one specified. If you s

English— 22 —What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring.Before calling service, first

— 23 —External disc control mode (KDC-4016 only)The computer chip in the unit is not functioning normally. Press the reset button on the unit (see p.

English— 24 —Troubleshooting GuideThe following messages are displayed when certain problems are occurring in your system. Take therecommended actions

— 25 —FM tuner sectionFrequency range (200 kHz space) ...87.9 MHz – 107.9 MHz(50 kHz space) ...87.5 MHz – 108.0 MHzUsable sensiti

— 3 —To prevent injury or fire, take thefollowing precautions:• Insert the unit all the way in until it is fullylocked in place. Otherwise it may fall

— 4 —English• If you experience problems duringinstallation, consult your Kenwood dealer.• If the unit does not seem to be working right,try pressing

— 5 —Handling Compact discsPlaying a CD that is dirty, scratchedor warped can cause the sound toskip and the unit to operateincorrectly, resulting in

Switching Modes:Each time you press the SRC (source) button, the modeswitches as follows:Selecting standby mode:Press the SRC button repeatedly and sw

"BAS": Adjust the bass level.Setting values: - 8 - + 8Adjust various parameters of sound quality.Press the A.ADJ button for at least one sec

The faceplate of the unit can be detached and taken with you,helping to deter theft.GroovesRelease buttonProjectionsTheft Deterrent FaceplateAdjust th

Tuner featuresRemoving the Faceplate:Press the release button.The faceplate is unlocked, allowing you to detach it.• The faceplate is a precision piec