Kenwood HM-DV7 User Manual download pdf (Page 9)

System connection

Preparation section

The feet of the provided speaker can be replaced as required.

1 Remove the four feet on the front and rear

part of the bottom panel using a screwdriver.

2 Attach the feet to the specified positions on

the side panel. (Use the screws removed in

1 for attaching.)

Replacing the feet with the provided feet

÷ Do not install the subwoofer without feet.

Channel space setting (Except for U.K., Europe and Australia)

The space between radio channels has been set to the one that prevails in the area to which the system is shipped.

However, if the current channel space setting does not match the setting in the area where the system is to be

used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper recep-

tion of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with

your area by referring to the following table.

CHANNEL

Space Frequency

Area

USA, Canada and South

American countries

Other countries

FM: 100 kHz

AM: 10 kHz

FM: 50 kHz

AM: 9 kHz

1 Select the "TUNER" input.

2 Press the STOP7/TUNING MODE key.

(for more than 5 seconds)

Each press switches the space frequency alter-

nately.

1 FM 50 kHz, AM 9 kHz

2 FM 100 kHz, AM 10 kHz

Main unit only

STOP 7

TUNING MODE

TUNER/

BAND

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 71 72

No comments

Kenwood HM-DV7 User Manual Page 9