Kenwood KCA-BT300 User Manual download pdf (Page 10)

KCA-BT300

Before Use

• You need to register your cell-phone before using

it with this unit. For more details, see <Registering

Bluetooth device> (page 20).

• If you have registered two or more cell-phones,

you need to select one of them. For more details,

see <Selecting the Bluetooth device You Wish to

Connect> (page 22).

• To use the Phone Book, it must be downloaded to

this unit in advance. For details, see <Downloading

the Phone Book> (page 21).

• For the method of operation in the Menu mode,

refer to the Instruction Manual for Control Unit.

• For more information regarding the function with

[

] mark, see <Function Note> (page 30).

Making a call

Dialing Method

1. Entry dialing method mode

Press the [MUTE] button for at least 1 second.

2. Enter dialing method selection mode

Turn the [VOL] knob to select "Dialing Mode", and

then press the [ENTER] button.

3. Select a dialing method

Press the [ENTER] button.

"DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" »

"INCALL" » "MIS-CALL"

3 Methods of operations in the above modes are

described below.

4. Exit the dialing method selection mode

Press the [MUTE] button for at least 1 second.

3 Dial a number (

)

2- 1. Select the "DIAL" display.

2-2. Enter a phone number

Operation type Operation

Select the characters Turn the [VOL] knob.

Determine the characters.

Press the [

] button.

Delete the characters.

Press the [

] button.

2-3. Make a call

Press the [ENTER] button on the remote controller.

☞ You can input max 32 digits.

3 Speed dialing (Preset dial)

2- 1. Select the "DIAL" display.

2-2. Select the preset dial number

Press the [1] – [6] button.

2-3. Make a call

Press the [ENTER] button for at least 1 second.

☞ You need to register the preset dial number. (page 11)

Basic Operation of hands-free phoning (Model-C)

3 Calling a number in the call log ( )

2- 1. Select the "OUT-CALL" (outgoing call), "INCALL"

(incoming call), or "MIS-CALL" (missed call) display.

2-2. Select a name or phone number

Press the [

u] or [d] button.

2-3. Make a call

Press the [38] button for at least 1 second.

3 Calling a number in the Phone Book (

)

2- 1. Select the "INITIAL" display, proceed to step 2-2.

Select the "P-BOOK" display, proceed to step 2-3.

2-2. Select the initial to be searched for

Operation type Operation

Move to the next

character.

Turn the [VOL] knob or press the [

] or

[

] button.

Move to the next row.

Press the [

u] or [d] button.

Determine the

selected initial.

Press the [ENTER] button for at least 1 second.

2-3. Select the name

Operation type Operation

Move to the next

phone number.

Turn the [VOL] knob or press the [

u] or

[

d] button.

Move to the next

name.

Press the [

] or [ ] button.

2-4. Make a call

Press the [ENTER] button for at least 1 second.

Make a voice dialing call

1. Enter Bluetooth menu mode

Press the [MUTE] button for at least 1 second.

2. Enter voice dialing call mode

Turn the [VOL] knob to select "Voice Recognize".

3. Press the [ENTER] button.

"Ready?" is displayed.

4. Press the [ENTER] button.

"PB Name?" is displayed.

When a beep is heard, say the name within 2

seconds.

5. Press the [1] button.

"PN Type?" is displayed.

When a beep is heard, say the category within 2

seconds.

6. Make a call

This step is the same as step 3 of the procedure in

<Calling a number in the Phone Book>. You can

make a call or select a category.

☞ If your voice cannot be recognized, a message is

displayed. Pressing the [ENTER] button allows you to

retry voice input. See page 34.

☞ Both the name and category requires registration of a

voice tag. See page 22.

☞ Audio sound is not output during voice recognition.

B64-4713-00_10_KCA-BT300_KE.indb 10B64-4713-00_10_KCA-BT300_KE.indb 10 10/03/12 14:5110/03/12 14:51

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

Comments to this Manuals

No comments

Kenwood KCA-BT300 User Manual Page 10

Comments to this Manuals

Related products and manuals for Wireless Headsets Kenwood KCA-BT300