Kenwood TK-3131 User Manual download pdf (Page 30)

1 Turn the transceiver power OFF.

2 Press and hold the MENU key while turning

the transceiver power ON (for 1 second).

3 Press the ▲ or ▼ key to select “

”.

4 Press the MENU key to select “ ”

(lamp off), “

” (lamp on), or “ ”

(lamp auto).

5 Press the PTT, MON, or CAL key to exit

Setting Mode.

LAMP

The lamp is used to illuminate the Liquid Crystal Display. You

can set the lamp to remain off, remain on, or turn on when

you press any key other than the PTT switch (auto). When

set to auto, the lamp remains on for 5 seconds after pressing

a key before turning off again.

To select the lamp setting:

TIME-OUT TIMER

The purpose of the Time-out Timer is to prevent you from

using a channel for a long time. This function is useful, for

example, when you accidentally keep the PTT switch

pressed. Additionally, by limiting the amount of time you can

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

No comments

Kenwood TK-3131 User Manual Page 30