Kenwood TK-3131 User Manual download pdf (Page 21)

REVERT CHANNEL

The revert channel is the channel from which you start

scanning. So, for example, if you are on channel 1 when you

begin to scan, your revert channel is channel 1.

During scan, pressing the PTT switch will automatically select

the transceiver’s revert channel (in the above example,

channel 1) and you will begin transmitting. However, if you

are currently paused on another channel after having received

a signal (in the above example, any channel other than

channel 1 – such as channel 9), pressing the PTT switch will

allow you to transmit on that channel, rather than returning to

the revert channel. Scanning will resume after 5 seconds,

unless a signal is present on the channel.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 49 50

No comments

Kenwood TK-3131 User Manual Page 21