Kenwood TK-2102G User Manual download pdf (Page 5)

TK-2102G

DISASSEMBLY FOR REPAIR

■

Removing the case assembly from the chassis

1. Remove the two knobs

, cushion

and three round

nuts

2. Remove the two screws

3. Expand the right and left sides of the bottom of the case

assembly, then Iift and remove the chassis from the case

assembly

;

4. Taking care not to cut the speaker lead

, open the

chassis and case assembly.

■

Removing the TX-RX unit from the chassis

1. Remove the eleven screws

2. Remove the VOL/CH FPC from the TX-RX unit connector

(CN400)

3. Remove the solder from the antenna terminal using a

soldering iron, then lift the unit off

4. Remove the waterproof packing

and cushion

from

the antenna connector.

Note: The cushion cannot be reused. Afﬁ x a new cush-

ion when you remove the cushion.

5. Remove the two screws

and remove the antenna con-

nector.

Note: When reassembling the unit in the chassis, be

sure to solder the antenna terminal.

CN400

Antenna

terminal







■

Removing the lever

1. Press down the lever on the lower case

, insert a small

ﬂ at-head screwdriver into the space between the case

and lever, open the case carefully

and lift the lever off.

Note: Do not force to remove the lever from the case.

Case assembly

Lever knob





1 2 3 4 5 6 7 8 9 10 ... 41 42

Comments to this Manuals

No comments

Kenwood TK-2102G User Manual Page 5

Comments to this Manuals

Related products and manuals for Two-way radios Kenwood TK-2102G