Kenwood TK-190 User Manual download pdf (Page 27)

QUIET TALK (QT) AND DIGITAL QUIET TALK (DQT)

QT and DQT tones are encoded tones that help to

relieve you of unwanted calls. Calls that are received

on your channel that do not have the proper tone will

not be heard. You will only hear calls that are received

if they carry the tones that match those set up in your

transceiver.

Likewise, other persons will not hear your transmissions

unless their transceivers have a QT/DQT tone that

matches yours.

Your dealer will program tones onto the channels.

However, you can change those tones by following the

instructions below.

Note: Depending on dealer programming, if you change the channel, or

turn the transceiver power OFF and then back ON, your tones may

revert back to the original tones set up by your dealer.

1 Press the key programmed as Operator Selectable

Tone to enter OST Code Select mode.

2 Press the Side 1 and Side 2 keys to select the

desired code.

• Pressing the Side 1 key will increase the value.

Pressing the Side 2 key will decrease the value.

3 Press the Operator Selectable Tone key again to set

the selected value and exit OST Code Select mode.

• “OPT” appears on the display. (If you selected “OFF”,

“OPT” does not appear.)

1 2 ... 22 23 24 25 26 27 28 29 30 31

No comments

Kenwood TK-190 User Manual Page 27