Kenwood VR-9080 User Manual download pdf (Page 4)

Unpacking

Unpack the unit carefully and make sure that all accessories are

present.

FM indoor antenna (1) AM loop antenna (1)

(For VR-9080)) (For KRF-X9090D)

Remote control unit (1) Batteries (R03/AAA) (2)

RC-R0918

Microphone for SETUP (1) *AC plug adapter (1)

(Cord length: approx. 5m (16 feet)) (For KRF-X9090D)

*Use to adapt the plug on

the power cord to the shape

of the wall outlet.

(Accessory only for regions

where use is necessary.)

If any accessories are missing, or if the unit is damaged or fails to operate,

notify your dealer immediately. If the unit was shipped to you directly,

notify your shipper immediately. Kenwood recommends that you retain

the original carton and packing materials in case you need to move or ship

the unit in the future.

Keep this manual handy for future reference.

Preparing the remote control

Loading the batteries

1 Remove the cover. 2 Insert the batteries.

3 Close the cover.

• Insert two AAA-size (R03) batteries as indicated by the polarity

markings.

Operation

When the standby indicator is lit, the power turns ON when you press the

RECEIVER ON

key on the remote control. When the power comes ON,

press the key you want to operate.

• When pressing more than one remote control key successively, press

the keys securely by leaving an interval of 1 second or more between

keys.

Notes

1. The supplied batteries may have shorter lives than ordinary batteries

due to use during operation checks.

2. When the remote-controllable distance gets shorter than before,

replace both batteries with new ones.

3. Placing the remote sensor in direct sunlight, or in direct light from a

high frequency fluorescent lamp may cause malfunction.

In such a case, change the location of the system installation to prevent

malfunction.

Before applying the power

Remote sensor

Operating range

(Approx.)

Infrared ray system

RECEIVER ON

6 m

(20 feet)

Channel space switching

(Except for the U.S.A., Canada and Australia)

The space between radio channels has been set to the one that

prevails in the area to which the system is shipped. However, if the

current channel space setting does not match the setting in the area

where the system is to be used, for instance when you move from

area 1 or area 2 shown in the following table or vice versa, proper

reception of AM/FM broadcasts cannot be expected. In this case,

change the channel space setting in accordance with your area by

referring to the following table.

50us

AM 9kHz

FM50kHz

75us

AM 10kHz

FM100kHz

DE-EMPHASIS

CHANNEL SPACE

Turn the power OFF by pressing the POWER key before moving the

switch level. Move the switch lever to match your area with a small

screwdriver or other pointed tool, then turn the power ON again.

CHANNEL

Space Frequency

Area

U.S.A., Canada and South

American countries

Other countries

FM: 100 kHz

AM: 10 kHz

FM: 50 kHz

AM: 9 kHz

*5557/01-09/EN 05.7.16, 0:48 PM4

1 2 3 4 5 6 7 8 9 ... 55 56

Comments to this Manuals

No comments

Kenwood VR-9080 User Manual Page 4

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood VR-9080