Kenwood VR-9080 User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
23
EN
Preparing for surround sound
Setting up the speakers manually
(MANUAL SETUP)
1
Select a speaker system.
If you have THX certified speakers, please set them to NML/THX.
1 Press the 5/ keys or MULTI @/# keys to select the “MANUAL
SETUP” and press the MEMORY/ENTER key or the ENTER
key.
2 Select the “SP SETUP” and press the MEMORY/ENTER key
or the ENTER key again so that the subwoofer setting indication
“SUBW ON” appears.
L
SL SB SR
CR
SP MUTE
AB CLIP
SW
LFE
STEREO
3 Use the MULTI CONTROL knob or MULTI %/ keys to select
the appropriate subwoofer setting.
1 SUBW ON : A Subwoofer is connected to the receiver.
2 SUBW OFF : A Subwoofer is not connected to the receiver.
The initial setting is “SUBW ON”.
When Subwoofer output sound is required, select “FRNT NML/
THX”, or select both “FRNT LARGE” and “SW RE-MIX ON”.
4 Press the 5 key or MULTI # key to accept the setting.
When the setting “SUBW ON” is selected, the front speakers
setting indication “FRNT” appears.
When the setting “SUBW OFF” is selected, the Front Speakers
are automatically set to “FRNT LARGE” and the procedure skips
to step 7.
L
SL SB SR
CR
SP MUTE
AB CLIP
SW
LFE
STEREO
5 Use the MULTI CONTROL knob or MULTI %/ keys to select
the appropriate front speakers setting.
1 FRNT NML/THX : Average size Front Speakers are con-
nected to the receiver.
2 FRNT LARGE : Large size Front Speakers are connected
to the receiver.
6 Press the 5 key or MULTI # key to accept the setting.
The Center Speaker setting indication “CNTR” appears.
7 Use the MULTI CONTROL knob or MULTI %/ keys to select
the appropriate Center Speaker setting.
If you selected “FRNT LARGE” as the Front Speakers setting,
1 CNTR NML/THX : An average size Center Speaker is con-
nected to the receiver.
2 CNTR LARGE : A large size Center Speaker is connected
to the receiver.
3 CNTR OFF : A Center Speaker is not connected to the
receiver.
If you selected “FRNT NML/THX” as the Front Speakers
setting,
1 CNTR NML/THX : An average size Center Speaker is
connected to the receiver.
2 CNTR OFF : A Center Speaker is not connected to the
receiver.
8 Press the 5 key or MULTI # key again to accept the setting.
The Surround Speaker setting indication “SURR” appears.
W06 : No Spk S
Surround speakers are not connected.
Connect a pair of Surround speakers if you have a set.
If there are no Surround speakers, no need to connect it.
W07 : No Spk SB
Surround Back speakers are not connected.
Connect a pair of Surround Back speakers if you have a set.
If there are no Surround Back speakers, no need to connect it.
W08 : No SpkSBR
Surround Back Right speaker is not connected.
Connect a Surround Back Right speaker if you have one.
If there is no Surround Back Right speaker, no need to connect it.
Continued to next page.
*5557/20-26/EN 05.7.16, 1:24 PM23
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Comments to this Manuals

No comments