Kenwood RA-5000 User Manual download pdf (Page 26)

RV-7000/RV-6000/RA-5000

Connections

AM loop antenna

1 Attach to the stand.

2 Push the lever.

3 Insert the antenna cord.

4 Release the lever.

Connecting antennas

The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below.

AM loop antenna

Install in a position as apart as possible from this unit, the TV monitor,

personal computer, speaker cords and power cord, and place in an

orientation that can offer the best reception condition.

FM indoor antenna

Fix on a wall, etc. with a good

reception condition.

The provided antenna is intended

for temporary use in indoors. To

obtain stable FM reception, it is

recommended to use an outdoor

antenna. Be sure to disconnect the

indoor antenna when an outdoor

antenna is installed.

FM indoor antenna

1 Insert the antenna cord.

2 Fix the antenna on the wall.

FM outdoor antenna

Lead the 75Ω coaxial cable connected to the FM outdoor antenna

into the room and connect it to the FM 75Ω terminal.

Insert into the groove.

FM outdoor antenna

(commercially available)

FM antenna adapter

(commercially available)

Insert until the metallic

conductor becomes invisible.

¤Caution for outdoor antenna installation

Since antenna installation necessitates skill and experience,

always consult your dealer before installation. The antenna

should be placed at a distance from the power distribution

wires. Otherwise, an electric shock accident may occur if the

antenna falls down.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

No comments

Kenwood RA-5000 User Manual Page 26