Kenwood KSC-SW01 User Manual download pdf (Page 2)

ENGLISH

English

IMPORTANT SAFETY INSTRUCTIONS

Caution: Read this page carefully to ensure safe operation.

WARNING

• Before mounting or wiring etc., be sure to remove the

wire from the battery minus terminal.

(Not doing so can cause shorts or fires.)

• When extending the ignition, battery, or ground wires,

make sure to use automotive-grade wires or other wires

with a 0.75mm

(AWG18) or more to prevent wire deterio-

ration and damage to the wore coating.

• To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the speaker.

• In the event the unit generates smoke or abnormal smell,

immediately switch the power OFF. After this, please

contact your dealer or nearest service station as soon as

possible.

POWER OFF!

• Connect the illumination lamp-equipped speakers to DC

12V, negative ground.

• Do not attempt to open or modify the unit, for this could

cause fire hazard or malfunction.

• After taking the unit out of the polyethylene bag, be sure

to dispose of the polyethylene bag out of the reach of

children. Otherwise, they may play with the bag, which

could cause hazard of suffocation.

CAUTION

• Installation and wiring of the product requires expert skill

and experience. To ensure safety, be sure to have your

dealer or specialist perform the installation and wiring.

• Do not install the speaker in a spot exposed to direct sun-

light or excessive heat or humidity.

• Do not install the speakers in locations which may be

subject to water or moisture.

• Do not install the speakers in unstable locations or loca-

tions subject to dust.

• If the fuse blows, after checking to see if the wiring cord

has shorted, be sure to replace with the stipulated size

(amperage) fuse as displayed on the fuse box.

(Using fuses other than the stipulated size can cause

fires.)

Check the display!

To replace the fuse, refer to the vehicle instruction manu-

al.

• To prevent a short circuit when replacing a fuse, discon-

nect the wiring harness at first.

• Do not use gasoline, naphtha, or any type of solvent to

clean the speaker. Clean by wiping with a soft, dry cloth.

• Connect the speaker wires to appropriate speaker con-

nectors separately. Sharing the negative wire of the

speaker or grounding speaker wires to the metal body of

the car can cause this unit to fail.

• Do not connect cables and leads to both RCA cord input

jacks and the speaker input terminals simultaneously, for

this may cause malfunction or damage.

• When making a hole under a seat, inside the trunk, or

somewhere else in the vehicle, check that there is noth-

ing hazardous on the opposite side such as a gasoline

tank, brake pipe; or wiring harness, and be careful not to

cause scratches or other damage.

• For ground wire mounting, do not fasten the wire to

an airbag, steering or brake line system or other critical

safety unit bolts or nut.

(Can cause accidents.)

Information on Disposal of Old Electrical

and Electronic Equipment (applicable for

EU countries that have adopted separate

waste collection systems)

Products with the symbol (crossed-out

wheeled bin) cannot be disposed as house-

hold waste.

Old electrical and electronic equipment should be

recycled at a facility capable of handling these items

and their waste by products.

Contact your local authority for details in locating a

recycle facility nearest to you.

Proper recycling and waste disposal will help con-

serve resources whilst preventing detrimental effects

on our health and the environment.

Declaration of Conformity with

regard to the EMC Directive

2004/108/EC

Manufacturer:

Kenwood Corporation

2967-3 Ishikawa-machi, Hachioji-shi, Tokyo,

192-8525 Japan

EU Representative’s:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN,

The Netherlands

• When mounting, be sure to mount in a place that will not

interfere with driving or be dangerous to passengers dur-

ing sudden braking etc.

(Cause of injury or accidents.)

• After installing the unit, check to make sure that electrical

equipment such as the brake lamps, turn signal lamps

and windshield wipers operate normally.

• The driver should always stop the vehicle in a safe place

before performing the following action.

– Remote control operation

• Do not use the product for purposes other than on-board

mounting.

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve

Elektronik Eşyalarda Bazı Zararlı Maddelerin

Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun

olarak üretilmiştir.

This product complies with Directive, Number 26891 re-

garding "REGULATION ON THE RESTRICTION OF THE USE

OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND

ELECTRONIC EQUIPMENT".

B61-1344_EN.indd 2B61-1344_EN.indd 2 09.5.28 11:53:14 AM09.5.28 11:53:14 AM

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Kenwood KSC-SW01 User Manual Page 2

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood KSC-SW01