Kenwood KRF-V6020 User Manual download pdf (Page 16)

Operations

KRF-V7020/V6020/V5020 (En/T)

To adjust the balance

Muting the sound

MUTE lets you mute the sound of the speakers.

Press the MUTE key.

To cancel

Press the MUTE key again so that the “MUTE” indicator goes off.

• Muting can also be cancelled by adjusting the volume.

Blinks

Use the test tone feature. $ - 3

SOURCE DIRECT playback (analog sources only)

Use this function to pass the source material direct to the amplifier,

bypassing any audio processing.

To cancel

Press the SOURCE DIRECT key.

• Either press the LISTEN MODE, SOUND, and SETUP keys, or

switch to another input source to cancel SOURCE DIRECT play-

back.

Listening with headphones

1 Use the SPEAKERS A or B key (or the SPEAKERS key) to turn

off the speaker indicator.

Make sure the SPEAKERS

indicators are turned off.

2 Connect headphones to the PHONES jack.

• If you turn off all of the speakers when in the surround mode, the

mode is cancelled as well, resulting in stereo playback.

3 Use the VOLUME CONTROL knob (VOLUME) to adjust the vol-

ume.

1 Use the input selector to select the source (other than “TAPE”)

you want to record.

2 Set the cassette deck to record.

3 Start playback, then start recording.

Recording audio

Recording video

1 Use the input selector to select the video source (other than

“VIDEO2”) you want to record.

2 Set the video deck connected to VIDEO2/MONITOR to record.

3 Start playback, then start recording.

Recording

Recording a music source

1 Press the VIDEO 2/MONITOR

key.

2 Use the input selector to select a source other than “TAPE”.

3 Start playback on the cassette deck connected to the VIDEO2/

MONITOR jacks and start recording on the cassette deck con-

nected to the MD/TAPE jacks.

Copying tapes

1 Use the input selector to select “TAPE”.

2 Start playback on the cassette deck connected to the MD/TAPE

jacks and start recording on the cassette deck connected to the

VIDEO2/MONITOR jacks.

MONITOR = TAPE copying

TAPE = MONITOR copying

• To copy tapes using a double cassette deck, refer to the instruc-

tion manual of the double cassette deck.

MONITOR function

You can connect a cassette deck or graphic equalizer to the VIDEO2/

MONITOR jacks of the receiver. If a graphic equalizer is connected, the

VIDEO2/MONITOR key should be left in the on position. Alternately, if

a cassette deck equipped with a 3-head system is connected to the

VIDEO2/MONITOR jacks, you will be able to monitor the just-recorded

signal while making recordings on the cassette deck. By switching the

VIDEO2/MONITOR key on and off, you can compare the sound of the

source signal and the just-recorded signal. For more information, refer

to the instruction manual of the connected component.

To adjust the input level when the monitor function is turned on, use the

SOUND key and the MULTI CONTROL key. ¢

MUTE



S.DIRECT

TUNED

MEMO.

AUTO

ST.

AUTO SOUND

Press again.

• If SOURCE DIRECT playback was activated when using a sur-

round mode, cancelling it reactivates the previous surround mode.



STEREO

MONITOR

TUNED

MEMO.

AUTO

ST.

AUTO SOUND

PHONES

VIDEO 2 / MONITOR

INPUT SELECTOR

• On the KRF-V5020, this selection can be made using the control on

the receiver as well.

Make sure the SPEAKERS

indicators are turned off.

Models other than KRF-V5020

Normal playback

When recording a music source, switch the VIDEO2/MONITOR

setting to “MONITOR”. 8

When copying tapes, switch the VIDEO2/MONITOR setting to

“MONITOR”. 8

When recording video, switch the VIDEO2/MONITOR setting to

“VIDEO2”. 8

KRF-V5020

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments

Kenwood KRF-V6020 User Manual Page 16

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood KRF-V6020