Kenwood TK-5210G/5310G User Manual download pdf (Page 33)

SCAN PROGRAMMING (K2 AND K3 MODELS ONLY)

Using the key programmed with Scan Program, you are able

to reprogram your scan list.

1 Press the key programmed as Scan Program.

• The icon appears on the display and blinks.

2 Press the Side 2 and Side 3 keys to select the zone or

channel you will add to or remove from the scan list.

• The icon appears on the display for zones/ channels that

are added to the scan list.

• Press the A key to toggle between Zone Select and Channel

Select.

3 Press the <C key to add the selected zone or channel to

the scan list or the B key to remove the selected zone or

channel from the scan list.

• The icon appears on the display when a zone/ channel is

added to the scan list, and disappears when a zone/ channel

is removed from the scan list.

If the Priority channel has been set as Operator Selectable by

your dealer, you are able to reprogram the Priority mode as

well.

1 Press the key programmed as Scan Program.

• The icon appears on the display and blinks.

2 Press the Side 2 and Side 3 keys to select the channel

you will set as the Priority channel.

3 Press the A key.

4 Press the D> key to toggle the selected channel between

Priority mode and Normal mode.

• “P1”, “P2”, or “PP” appears on the display when Priority mode

is selected.

5 Press the A key again to set the new channel setting.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

No comments

Kenwood TK-5210G/5310G User Manual Page 33