STEREO CASSETTE DECKCT/KXF-W SERIESINSTRUCTION MANUALKENWOOD CORPORATIONB60-3706-00 HZ ( K, P, T, M, X, Y )ID99/3 2 1 98/12 11 10 9 8 7 6 5 4 3CT-2
CT-2050/203/KXF-W6010/W4010 (En/M)10Playback (recording) preparation2Select the tape transport direction.1Load a cassette tape in deck A or B.Preparat
11CT-2050/203/KXF-W6010/W4010 (En/M)Normal playbackListening to cassette tapesPreparationMake “Playback (recording) preparation”.0Zero-stop operationT
CT-2050/203/KXF-W6010/W4010 (En/M)12Listening to cassette tape÷ Tapes are played in the directions indicated by their respective indicatorson the disp
13CT-2050/203/KXF-W6010/W4010 (En/M)
CT-2050/203/KXF-W6010/W4010 (En/M)14Skip play operationTo play the tune located 4 tunes behindConvenient music search (DPSS)The DPSS (Direct Program S
15CT-2050/203/KXF-W6010/W4010 (En/M)Convenient music search (DPSS)Rewind & Play operationDash & Play operationSingle-tune repeated playback
CT-2050/203/KXF-W6010/W4010 (En/M)16Each press of the MODE key changes the setting.1 “LEVEL” lights up: Recording level setting mode2 “BAL.” lights up
17CT-2050/203/KXF-W6010/W4010 (En/M)How to record (CT-203/KXF-W4010; Deck B only)÷ To adjust the bias level, play back the recorded sound and adjust t
CT-2050/203/KXF-W6010/W4010 (En/M)18How to record (CT-203/KXF-W4010; Deck B only)÷ If there is no recorded tune before, the tape will be rewound thens
19CT-2050/203/KXF-W6010/W4010 (En/M)÷ Recording will start.÷ Recording on deck B starts immediately after recording on deck A hascompleted.3Adjust the
CT-2050/203/KXF-W6010/W4010 (En/M)2Before applying powerCaution : Read this section carefully to ensure safe operation.Units are designed for operatio
CT-2050/203/KXF-W6010/W4010 (En/M)20Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)Tape dubbing operation (Deck A \ Deck B)T
21CT-2050/203/KXF-W6010/W4010 (En/M)Start playing the CD.Set the record-pause mode.Adjust the recording level.2Press 7 key of theCD player.Press the
CT-2050/203/KXF-W6010/W4010 (En/M)22Convenient CD recording (CT-203/KXF-W4010; Deck B only)Recording of CD playback (CCRS) (Deck B only)1Insert a tape
23CT-2050/203/KXF-W6010/W4010 (En/M)÷ Set the timer so that the tape starts at the desired time of the day.÷ When the set time comes, tape playback st
CT-2050/203/KXF-W6010/W4010 (En/M)24Timer operations34Set the TIMER switch to REC.Set the amplifier volume to the minimum position.÷ Refer to the &quo
25CT-2050/203/KXF-W6010/W4010 (En/M)In case of difficultySymptomSounds is not produced when the Play key ispressed.The deck does not work when an oper
CT-2050/203/KXF-W6010/W4010 (En/M)26In case of difficulty÷ Use a cassette with unbroken tab or close thehole.÷ Close the cassette holder completely.÷
In case of difficulty27CT-2050/203/KXF-W6010/W4010 (En/M)Dolby noise reduction systemThe Dolby noise reduction system was developed to reduce the tape
CT-2050/203/KXF-W6010/W4010 (En/M)28Track System ... 4 track, 2 channel stereoRecording System ... AC bias (Frequency: 105 kHz)He
3CT-2050/203/KXF-W6010/W4010 (En/M)IntroductionAccessoriesCheck that the following accessories are present.Audio cord ... (2) Sys
CT-2050/203/KXF-W6010/W4010 (En/M)4Caution on condensationCondensation (of dew) may occur inside the unit when there is a greatdifference in temperatu
5CT-2050/203/KXF-W6010/W4010 (En/M)Important itemsTo store cassette tapesDo not store the tapes in a place which is subject to directsunlight, or near
CT-2050/203/KXF-W6010/W4010 (En/M)6Make connections as shown below. When connecting therelated system components, refer also to the instructionmanuals
7CT-2050/203/KXF-W6010/W4010 (En/M)System connectionsSWITCHING FROM [SL16] TO [XS8]You can easily change the system control mode with the following op
CT-2050/203/KXF-W6010/W4010 (En/M)8¡ 8PAUSE¶REC/ARM1¡8PAUSE¶REC/ARM1STEREO DOUBLE CASSETTE DECK KXF-W6010REC LEVEL/BAL./BIAS∞MAX/R∞MIN/LMODETIMERRE
9CT-2050/203/KXF-W6010/W4010 (En/M)Controls and indicators1 Deck AThis deck is used exclusively for play-back. (CT-203/KXF-W4010 only)This deck is cap
Comments to this Manuals