Kenwood TM-741A User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 77
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
To clear both programmed limits simultaneously,
turn the Power off ,then;
ALL BAND mode
Press and hold the VFO key, then turn the Power
switch on (VFO RESET See page 30).
INDIVIDUAL BAND mode
Press and hold the VFO key and the BAND SEL key
for the band you want to clear, then turn the Power
switch on.
You can reprogram either limit independently by fol
lowing the appropriate instructions above.
2. As soon as a signal is received on any band, the TX
circuit will become active on that band.
(
lOHS
,^unnn ff^.nnnn
I'il.UUU Wu.uuu
3.
If you press the PTT switch,
The A.B.C. function will be released. The band
remains TX band.
4-2-5. A.B.C.(Automatic Band Change)
The A.B.C function allows you to exchange the RX band
to the TX band automatically whenever a signal is
received and the squelch is open.
1. Press the F key and then press the MUTE/ABC key.
The A.B.C. indicator will light on the display.
If the PTT switch is not pressed,
Within 2 seconds after the signal goes off, the band
will be returned to RX band.
If you press the BAND SEL key.
The A.B.C function will be released.
(Jj
A.B.C.
(^MUTE^
'^.unnn .,.,nnnn
lUlD IHi.uuu 'iHu.uuu
24
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 76 77

Comments to this Manuals

No comments