Kenwood TM-741A User Manual download pdf (Page 10)

3-2-2. Mobile Installations

Battery Connections

Cautions

1. Before installing the power cable, be sure to remove

the negative lead from the battery for safety.

2. After installation and wiring, be sure to double

check for correct installation before reconnecting

the negative lead to the battery terminal.

3. If the fuse opens, be sure to check that each

conductor has not been damaged by short circuiting,

etc. Then replace with a new fuse of the same

rating.

4. After completing the wiring, wrap the fuse holder

with heat resistant tape to protect against heat and

moisture.

5. Do not remove the fuse even if the power cable is too

long.

Make sure the positive (+) and negative (—) lead polarity is

correct when connecting to the battery.

Engine compartment-——-Passenger compartment

Fuse 0 f

\ To the

\transceiver

Red

select a location wh«re

the power cable ¡8 pro

tected from heat, mois

ture or abrassion when

securing the cable.

________

Make sure the cable

does not directly contact

the edge of the hole by

using a grommet.

Chassis or

"^fire wall

If the wiring hole in the fire wall or chassis is too small,

disassemble the fuse holder to thread the wire through the

hole.

j£

From passenger

compartment

Thread like this

Caution

Leave enough space around the fan on the rear panel

for good ventilation.

Connect the power cable directly to the battery

terminals. Use of the cigarette lighter socket will lead to

poor connection, and will result in poor performance.

Pay close attention to the polarity of the cables when

connecting them to the battery.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 76 77

Comments to this Manuals

No comments

Kenwood TM-741A User Manual Page 10

Comments to this Manuals

Related products and manuals for Car speakers Kenwood TM-741A