Kenwood eXcelon KDC-X769 User Manual download pdf (Page 43)

— 43 —

3 Reattach the Backpanel.

Never insert the panel lock screws (M2 X 1.5 mm) in any other screw

holes than the one specified. If you insert them in another hole, it will

contract and may cause damage to the mechanical parts inside the unit.

1 Refer to the Removing the Backpanel function of the section on

<Theft Deterrent Panel> (page 18) and remove the Backpanel.

2 Insert the panel lock screws into the holes at the sides of the

panel.

Accessory5

Locking the Backpanel to the unit

Accessory2

Removal tool

Screw (M4X8)

(commercially

available)

■ Removing the Unit

4 Lower the removal tool

toward the bottom, and

pull out the unit halfway

while pressing towards the

inside.

Be careful to avoid injury from

the catch pins on the removal

tool.

5 Pull the unit all the way out

with your hands, being

careful not to drop it.

1 Refer to the section <Removing the hard rubber frame> and

then remove the hard rubber frame.

2 Remove the screw (M4 × 8) on the back side.

3 Insert the two removal tools deeply into the slots on each

side, as shown.

KDC-MP822_U.S 02.12.11 11:23 AM Page 43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

No comments

Kenwood eXcelon KDC-X769 User Manual Page 43