Kenwood DNX6040EX User Manual download pdf (Page 83)

8282

Return to the Top page

Audio Setting Up

3

Select a speaker size using [2] and

[3]. The speaker size is different

depending on the speaker type and

the unit.

Front

OEM, 4 inch, 5 inch, 6-1/2 inch, 6-3/4 inch, 7

inch, 4x6, 5x7, 6x8, 6x9, 7x10

Rear

None, OEM, 4 inch, 5 inch, 6-1/2 inch, 6-3/4

inch, 7 inch, 4x6, 5x7, 6x8, 6x9, 7x10

Subwoofer

None, 6 1/2 inch, 8 inch, 10 inch, 12 inch, 15

inch over

NOTE

• Select “None” if you have no speakers.

Front

Standard, Wide, Middle, Narrow

Crossover network setup

You can set a crossover frequency of

speakers.

1

Touch the speaker to set the crossover

in the Speaker Select screen.

2

Touch [X’over].

X’over screen appears.

3

Set each item as follows.

Phase*

Sets the phase of subwoofer output.

The phase is reversed 180 degrees when set to

“Reverse.”

HPF FREQ

High Pass Filter adjustment. (When front or rear

speaker is selected on Speaker Select screen)

LPF FREQ

Low Pass Filter adjustment. (When subwoofer

is selected on Speaker Select screen)

Slope

Sets a crossover slope.

* This function is available in the specific

situation.

Only when “Subwoofer” is set to

“ON” in “Speaker Setup”.

Only when “Subwoofer” is

set to “ON” in “Speaker Setup” and “LPF

FREQ” is set to other than “Through”.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 110 111

Comments to this Manuals

No comments