KDC-PSW9521KDC-M9021SEKDC-M9021KDC-8021© B64-2597-00/00 (EF)COMPACTDIGITAL AUDIOINSTRUCTION MANUALCD-RECEIVERKDC-M9021SE(EF)_ Cover 03.1.17 3:14 PM
1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [AUD] button for at least 1 second.3 Select the Audio ite
Press the [ANG] button for at least 1 second.Do not apply excessive force to the faceplate. It can cause damage.Faceplate Angle AdjustmentFunction of
Function of the KDC-8021Fine-tuning so that the System Q value is optimal when settingthe speaker type.1Enter StandbyPress the [SRC] button.Select the
Switching the information displayed in Standby.1 Enter StandbyPress the [SRC] button.Select the "ALL OFF" display.2 Enter Menu modePress the
In CD/ External disc sourceUpper Part DisplayInformation DisplayTrack Time "P-Time"Disc name "DNPS"Disc title "DISC-TITLE&quo
Lower Part DisplayInformation DisplaySpectrum Analyzer (KDC-PSW9521) "S/ANA"Spectrum Analyzer & Graphic "S/ANA+GRAPHIC"(KDC-M9
The audio system automatically mutes when a call comes in.When a call comes in"CALL" is displayed.The audio system pauses.Listening to the a
Selecting the station.1 Select tuner sourcePress the [SRC] button.Select the "TUNER" display.2 Select the bandPress the [FM] or [AM] button.
Putting a station with good reception in the memoryautomatically.1Select the band for Auto Memory EntryPress the [FM] or [AM] button.2Enter Menu modeP
Displaying the program service name and selecting the station.1 Enter SNPP modePress the [DNPP] button on the remote.When "SNPP" is displaye
— 2 —EnglishContentsSafety precautions...3About RDS ...5Notes on playing MP3/WMA...6About CDs...
Scrolling the displayed radio text.Press the [SCRL] button for at least 1 second.Radio Text ScrollSwitching to traffic information automatically when
21. Social Affairs "Social Affairs"22. Religion "Religion"23. Phone In "Phone In"24. Travel "Travel & Touring&q
Selecting the Program Type display language.1 Enter PTY modeRefer to <PTY (Program Type)> (page 21).2 Enter Changing Language modePress the [TI]
CD/MP3/WMA/External disc control features— 23 —IN P/S ATT ST LOUD RDSTI¢4FMAMSRCRDM/M.RDM/F.SELSCRLMENUSCN/#1REP/D.REP0KDC-PSW9521KDC-M9021SE/ KDC-M90
Fast ForwardingHold down on the [¢] button.Release your finger to play the disc at that point.ReversingHold down on the [4] button.Release your finger
Doing Disc Search by entering the disc number.1 Enter the disc numberPress the number buttons on the remote.2 Do Album SearchPress the [FM] or [AM] bu
Play the songs on all the discs in the disc changer in randomorder.Press the [M.RDM] button for at least 1 second.Each time the button is pressed the
Selecting the CD displayed in the DNPS of the CDs set in theDisc changer.1 Enter DNPP modePress the [DNPP] button on the remote.When "DNPP"
Scrolling the displayed CD text, MP3/WMA text, or MD title.Press the [SCRL] button for at least 1 second.Text/Title ScrollCharacters can be entered by
Setting during operation beep sound etc. functions.The Menu system basic operation method is explained here. Thereference for the Menu items and their
— 3 —To prevent injury and/or fire, take thefollowing precautions:• Insert the unit all the way until it is fullylocked in place. Otherwise it may fly
This adjustment can be done when the <Synchronize Clock> (page31) is set as OFF.1 Select Clock Adjustment modePress the [FM] or [AM] button.Sele
Selecting the button illumination color as green or red.Display Setting"Button Color Green"/"Button Green"The illumination color i
Function of the KDC-PSW9521Selecting the display font.1 Select Font Type Select ModePress the [FM] or [AM] button.Select the "Font Select" d
Toggles ON or OFF the mute control on the built-in amplifier.Turning ON this control enhances the preout quality.Display Setting"Builtin AMP Mute
It switches automatically when a news bulletin starts even if theradio isn't being listened to. Also, the time interval wheninterrupt is prohibit
When poor reception is experienced, automatically switch toanother frequency broadcasting the same program in the sameRDS network with better receptio
For selecting the display when switched to Auxiliary inputsource. For the Disc Naming refer to the <Disc Naming> (page28).1Select Auxiliary inpu
Setting the timer to turn this unit's power OFF automaticallywhen Standby mode continues.Using this setting can save the vehicle's battery p
[VOL.] buttonsAdjusting the volume.[SRC] buttonEach time the button is pressed the source switches.For the source switching order refer to <Selecti
[#0] — [#9] buttonsWhen in <Direct Track Search> (page 25) and <Direct AlbumSearch> (page 25), enter the track/disc number.[4]/ [¢] button
— 4 —English• If you experience problems duringinstallation, consult your Kenwood dealer.• If the unit fails to operate properly, press theReset butto
English— 40 —The use of any accessories except for those provided might result indamage to the unit. Make sure only to use the accessories shipped wit
— 41 —TEL MUTEEXT.CONTP.CONTANT.CONT1234567812345678FRONTNONFADINGREARFront left output (White) 14Front right output (Red) 13Non-fading right output (
English— 42 —Make sure that the unit is installed securely in place. If the unit isunstable, it may malfunction (eg, the sound may skip).Bend the tabs
— 43 —1 Insert the removal tool into theindentations in the hard rubberframe, and pull it gently until thelock is released.Accessory4Removal toolScrew
English— 44 —— 44 —What might seem to be a malfunction in your unit mayjust be the result of slight misoperation or miswiring.Before calling service,
— 45 —— 45 —Troubleshooting Guide? Non-fading output, Non-fading Low Pass Filter and Non-fadingsetting can’t be done.28✔ The <Non-fading output>
MP3/WMA source? Cannot play an MP3/WMA.67✔ Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo. ☞ Use a medium conforming to ISO 9660 Level 1/2, J
— 47 —— 47 —? Can’t enter Album Select mode.101✔ There’s no folder recorded in the MP3/WMA media.☞ Use a media with levels.? The songs in the selected
••••••••IN (Blink): The CD player section is not operating properly.E59➪Reinsert the CD. If the CD cannot be ejected or thedisplay continues to flash
— 49 —— 49 —FM tuner sectionFrequency range (50 kHz space) ...87.5 MHz – 108.0 MHzUsable sensitivity (S/N = 26dB) ...
— 5 —About RDSThe marking of products using lasers(Except for some areas) The label is attached to the chassis/case andsays that the component uses la
KDC-M9021SE_U.S 03.1.17 3:20 PM Page 50
KDC-M9021SE_U.S 03.1.17 3:20 PM Page 51
KDC-M9021SE_U.S 03.1.17 3:20 PM Page 52
— 6 —EnglishNotes on playing MP3/WMA(KDC-PSW9521)/ MP3(KDC-M9021SE/KDC-M9021)This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3)/WMA. Note,however, th
— 7 —MP3/WMA playing orderWhen selected for play, Album Search, Track Search, or for AlbumSelect, files and folders are accessed in the order in which
— 8 —EnglishAbout CDsHandling CDs• Don’t touch the recording surface of the CD.• CD-R and CD-RW are easier to damage thana normal music CD. Use a CD-R
Increasing VolumeTurn the [VOL] knob clockwise.Decreasing VolumeTurn the [VOL] knob counterclockwise.VolumeTurning ON the PowerTurn the vehicle igniti
Comments to this Manuals