Kenwood KDC-U546BT User Manual download pdf (Page 18)

KDC-U546BT

Other Functions

Clock Adjustment

1 Select the source

Press the [SRC] button.

2 Enter Function Setting mode

Press the [VOL] knob for at least 1 second.

“FUNCTION” is displayed.

3 Enter Clock adjustment mode

Turn the [VOL] knob and press it when the

desired item is displayed.

Select “SETTINGS” > “CLOCK” > “CLOCK

ADJUST”.

The hour display blinks

4 Adjusting Clock

Turn the [VOL] knob to set the hours and press

it when to finish the hour adjusting.

The minute display blinks.

Turn the [VOL] knob to set the minutes and

press it when to finish the minute adjusting.

5 Exit Function Setting mode

Press the [ ] button for at least 1 second.

Demonstration Mode Setting

Turning the demonstration mode ON/OFF.

1 Enter Function Setting mode

Press the [VOL] knob for at least 1 second.

“FUNCTION” is displayed.

2 Select Demonstration mode

Turn the [VOL] knob and press it when the

desired item is displayed.

Select “DEMO MODE”.

3 Set the Demonstration mode

Turn the [VOL] knob and press it when the

desired item is displayed.

Select “ON” or “OFF”.

4 Exit Function Setting mode

Press the [ ] button for at least 1 second.

Initial Setting

You can select following Initial Setting items.

1 Select the Standby source

Press the [SRC] button.

Select the “STANDBY” display.

2 Enter Function Setting mode

Press the [VOL] knob for at least 1 second.

“FUNCTION” is displayed.

3 Select the function item

Turn the [VOL] knob and press it when the

desired item is displayed.

Select “INITIAL SET” > Function item.

Function item Selectable setting/item

“PRESET TYPE”

TYPE NORMAL:

1 station can be assigned to 1 preset button in each

of 6 bands (FM1, FM2, FM3, MW, SW1 and SW2),

i.e., a total of 36 stations (6 stations x 6 bands) can

be preset.

TYPE MIX:

A total of 6 stations can be assigned to a total of 6

preset buttons regardless of band (FM1, FM2, FM3

MW, SW1, and SW2). You can recall a preset station

without switching between bands.

“KEY BEEP”

Setting the operation check sound (beep sound)

on/off.

OFF/ON

“TDF ALARM”

Informs you by alarm sound about 30 seconds

that you forgot to detach the faceplate when ACC

is set to OFF.

OFF/ON

“BUILT-IN AUX”

When this is set to ON, AUX source can be selected.

ON1: Outputs the sound of external unit connected

to the AUX terminal when switched to AUX

source.

ON2: Activates the attenuator function when

turning on the power with AUX source

selected. Cancel the attenuator function

by turning the volume knob clockwise

when listening to the audio of the external

equipment.

OFF: Disables the selection of AUX source. Set to

OFF when not using the AUX terminal.

[SRC]

[VOL]

[

]

Release button

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 73 74

Comments to this Manuals

No comments

Kenwood KDC-U546BT User Manual Page 18

Comments to this Manuals

Related products and manuals for Car media receivers Kenwood KDC-U546BT