Kenwood KDC-U546BT User Manual download pdf (Page 11)

English

Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the

frequency.

1 Enter Direct Access Tuning mode

Press the [DIRECT] button.

“– – – –” is displayed.

2 Enter the frequency

Press the number buttons.

Example:

Desired frequency Press button

92.1 MHz (FM) [9], [2], [1]

810 kHz (AM) [8], [1], [0]

3 Tune in to entered the frequency

Press the [4] or [¢] button.

Cancelling Direct Access Tuning

Press the [ ] button.

⁄

• You can enter the FM band frequency in steps of a

minimum of 0.1 MHz.

Frequency Step Setting

Changing the tuning frequency step.

The original setting is FM band 50 kHz and MW

band 9 kHz.

1 Turn the power OFF

Press the [SRC] button for at least 1 second.

2 Switch the frequency step

While pressing the [1] and [5] buttons, press the

[SRC] button.

Release your fingers from the button after the

display appears.

The frequency step changes to FM band 200 kHz,

and MW band 10 kHz.

⁄

• When the same operation is repeated, the frequency

step returns to the original setting.

• When the frequency step is changed, the frequencies in

the memory are deleted.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 73 74

No comments

Kenwood KDC-U546BT User Manual Page 11