Kenwood KTC-D500E User Manual download pdf (Page 3)

English 3

Safety precautions

2WARNING

• Mounting and wiring this product requires skills and

experience. For safety’s sake, leave the mounting

and wiring work to professionals.

2CAUTION

• Make sure to ground the unit to a negative 12V DC

power supply.

• Use only the screws provided or specified for

installation. If you use wrong screws, you could

damage the unit.

• If your vehicle’s ignition does not have an ACC

position, or if the ignition wire is connected to

a power source with constant voltage such as a

battery wire, the power will not be linked with the

ignition (i.e., it will not turn on and off along with

the ignition). If you want to link the unit’s power

with the ignition, connect the ignition wire to a

power source that can be turned on and off with

the ignition key.

• If the fuse blows, first make sure the wires aren’t

touching to cause a short circuit, then replace the

old fuse with one with the same rating.

• After the unit is installed, check whether the brake

lamps, blinkers, wipers, etc. on the car are working

properly.

KTC-D500E.indb 3KTC-D500E.indb 3 07.7.26 9:36:41 AM07.7.26 9:36:41 AM

1 2 3 4 5 6 7 8 ... 171 172

No comments

Kenwood KTC-D500E User Manual Page 3