Kenwood KDC-DAB43U User Manual download pdf (Page 2)

Match thecontact tabsof the amplifier©

with the

A

on the antenna film © and

stick.

■ Do not touch the feeder terminal or the

sticky surface (adhesive side) of the

amplifier.

Amplifier©

Interior part

Earth sheet

9 Route the antenna cable down the pillar and

across the inside of the dash, to the head-unit

location

■ Use cable ties to secure the antenna cable to

the pillar at several locations.

Notes

8 Remove the film covering the earth sheet

and stick the earth sheet on to the metal

part of the windscreen pillar.

Provide sufficient leeway for the earth

sheet so that it does not interfere with the

interior parts (front pillar cover).

Also take care that the interior parts do not

interfere with the amplifier ©.

Front glass

y Front pillar

Take the following precautions when routing

the antenna cable down the front pillar if

an air bag is installed.

Install the Amplifier part of the antenna cable

behind or away from an air bag or it's wiring

so that it does not interfere with the vehicles

safety systems.

The front pillar cover is secured with

a special dip which may need to be

replaced when the front pillar cover is

removed.

Contact your vehicle dealer for details

on replacing the front pillar cover and

availability of replacement parts.

10 Final connection 8> antenna start-up

Plug DAB Antenna into botom

left hand port as shown above.

Select the DAB antenna power

Set "INITIAL SET" > "DAB ANT POWER" to "ON"

in STANDBY mode.

Push and hold the DAB button to auto tune all

available DAB stations

1 2

Comments to this Manuals

No comments