
NOTE: Secure the a/c vent, climate
control, hazard switch, and the pas
senger air bag on/off light into the
99-7871 radio housing panel using
the factory hardware. (Figure A)
1 Remove the center bar from the 99
7871 radio housing, (Figure B)
2 Attach the corresponding bracket to
the DDIN head unit. (Figure C)
3 Insert the DDIN trim plate into the
radio housing. (Figure D)
4 Position the bracket/radio assembly
to the back of the radio housing and
secure with the (8) Phillips screws
provided. (Figure D)
KENWOOD
Installation Manual
Double DIN Kit
anthracite: CAW 2130-04
taupe: CAW 2130-05
Honda Civic Hybrid 2006 ->
Compatible with these Kenwood double DIN devices
Kenwood Navigation
© 12/2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
Comments to this Manuals