Kenwood DNN991HD Quick Start Guide download pdf (Page 23)

English ñ 23

Ñ Removing the trim plate

1) Engage the catch pins on the extraction key

(accessory3) and remove the two locks on the

lower level.

Lower the trim plate (accessory8) and pull it

forward as shown in the ﬁgure.

Lock

Catch

✎ NOTE

• The trim plate can be removed from the top side in

the same manner.

2) When the lower level is removed, remove the

upper two locations.

Ñ Removing the unit

1) Remove the trim plate by referring to step 1 in

“Removing the trim plate”.

2) Insert the two extraction key (accessory3)

deeply into the slots on each side, as shown.

3) Lower the extraction key toward the bottom,

and pull out the unit halfway while pressing

towards the inside.

✎ NOTE

• Be careful to avoid injury from the catch pins on the

extraction key.

4) Pull the unit all the way out with your hands,

being careful not to drop it.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

No comments

Kenwood DNN991HD Quick Start Guide Page 23