Kenwood VR-804 User Manual download pdf (Page 4)

Operation

When the STANDBY indicator is lit, the power turns ON when you press

the POWER

key on the remote control. When the power comes ON,

press the key you want to operate.

• When pressing more than one remote control key successively,

press the keys securely by leaving an interval of 1 second or more

between keys.

Notes

1. The supplied batteries may have shorter lives than ordinary batteries

due to use during operation checks.

2. When the remote-controllable distance gets shorter than before,

replace both batteries with new ones.

3. Placing the remote sensor in direct sunlight, or in direct light from a

high frequency fluorescent lamp may cause a malfunction.

In such a case, change the location of the system installation to

prevent malfunction.

Before applying the power

Preparing the remote control

Loading the batteries

1 Remove the cover. 2 Insert the batteries.

3 Close the cover.

• Insert two AA-size (R6) batteries as indicated by the polarity markings.

Channel space switching

(Except for the U.S.A., Canada and Australia)

The space between radio channels has been set to the one that

prevails in the area to which the system is shipped. However, if the

current channel space setting does not match the setting in the area

where the system is to be used, for instance when you move from

area 1 or area 2 shown in the following table or vice versa, proper

reception of AM/FM broadcasts cannot be expected. In this case,

change the channel space setting in accordance with your area by

referring to the following table.

Turn the power OFF by pressing the POWER key before moving the

switch level. Move the switch lever to match your area with a small

screwdriver or other pointed tool, then turn the power ON again.

CHANNEL

Space Frequency

Area

U.S.A., Canada and South

American countries

Other countries

FM: 100 kHz

AM: 10 kHz

FM: 50 kHz

AM: 9 kHz

DE-EMPHASIS

CHANNEL SPACE

50us

AM 9kHz

FM50kHz

75us

AM 10kHz

FM100kHz

50us

AM 9kHz

FM50kHz

75us

AM 10kHz

FM100kHz

DE-EMPHASIS

CHANNEL SPACE

Memory back up function

Please note that the following items will be deleted from the unit's

memory if the power cord is disconnected from the AC outlet for

approximately 1 day.

• Power mode. • SUBWOOFER ON/OFF.

• Input selector settings. • SW RE-MIX ON/OFF.

• Picture output. • Distance setting.

• Speaker ON/OFF. • Input mode setting.

• Volume level. • Midnight mode setting.

• BASS, TREBLE, INPUT level. • PRO LOGIC II mode setting.

• TONE ON/OFF. • Broadcast band.

• LOUDNESS ON/OFF. • Frequency setting.

• Dimmer level. • Preset stations.

• MD/TAPE settings. • Tuning mode.

•Listen mode setting. • ACTIVE EQ mode.

• SP SYSTEM. • DSP mode.

• Speaker settings.

6 m

POWER

Infrared ray system

Operation range

(Approx.)

Remote sensor

*5444/01-07/EN 04.1.22, 9:07 PM4

1 2 3 4 5 6 7 8 9 ... 31 32

Comments to this Manuals

No comments

Kenwood VR-804 User Manual Page 4

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood VR-804