Kenwood KDC-BT41U User Manual download pdf (Page 13)

English 13

Continued to next page

Adjust [SETTINGS] mode settings

While listening to an iPod or KENWOOD Music

Editor media ...

1 Press the volume knob to enter

[FUNCTION] mode.

2 Turn the volume knob to select

[SETTINGS], then press to enter.

3 Turn the volume knob to make a

selection, then press to confirm.

See the following table for selection.

4 Hold to finish the procedure.

Item Selectable setting (Preset: *)

SKIP SEARCH 0.5% */ 1%/ 5%/ 10%: Sets the ratio of skip

when searching for a song in Music Search

mode.

MPLIST

DELETE

YES: Deletes the saved My Playlist. ;

NO *: Cancels.

■

[MPLIST DELETE] is selectable only when the source is

“iPod”.

Discs that cannot be used

■

This unit can only play the CDs with:

■

Discs that are not round.

■

Discs with coloring on the recording

surface or discs that are dirty.

■

You cannot play a Recordable/ReWritable

disc that has not been finalized. (For the

finalization process refer to your disc

writing software, and your disc recorder

instruction manual.)

■

3-inch CD cannot be used. Attempt

to insert using an adapter can cause

malfunction.

About Audio file

■

Playable Audio file

: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)

■

Playable disc media: CD-R/RW/ROM

■

Playable disc file format: ISO 9660 Level

1/2, Joliet, Romeo, Long file name.

■

Playable USB device or SD card file system:

FAT16, FAT32

Although the audio files are complied with

the standards listed above, the play maybe

impossible depending on the types or

conditions of media or device.

■

Detailed information and notes about the

playable audio files are stated in an online

manual on the following site:

www.kenwood.com/cs/ce/audiofile/

About USB device

■

This unit can play audio files stored on a

USB mass storage class device.

■

Install the USB device in the place where

it will not prevent you from driving your

vehicle properly.

■

You cannot connect a USB device via a

USB hub and Multi Card Reader.

■

Make sure all important data has been

backed up to avoid losing the data.

Handling discs

■

Do not touch the recording surface of

the disc.

■

Do not stick tape etc. on the disc, or use a

disc with tape stuck on it.

■

Do not use any accessories for the disc.

■

Clean from the center of the disc and

move outward.

■

Clean the disc with a dry silicon or soft

cloth. Do not use any solvents.

■

When removing discs from this unit, pull

them out horizontally.

■

Remove the rims from the center hole

and disc edge before inserting a disc.

B64-4799-00_00_E_English.indd 13B64-4799-00_00_E_English.indd 13 10/12/03 9:5610/12/03 9:56

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments

Kenwood KDC-BT41U User Manual Page 13

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood KDC-BT41U