Kenwood UHF P25 Transceiver TK-5810 User Manual download pdf (Page 31)

EMERGENCY CALLS

If your transceiver has been programmed with the Emergency function, you can

make emergency calls.

Note: Emergency can be programmed only on the PF 5 key.

1 Press and hold the key programmed as Emergency.

• Depending on the delay time programmed into your transceiver, the length of time

you must hold the Emergency key will vary.

• When the transceiver enters Emergency mode, the transceiver will change to the

Emergency channel and begin transmitting based on how the transceiver is set up

by your dealer. Transmit periods are also set by your dealer.

2 To exit Emergency mode, press and hold the Emergency key again.

• If the Emergency mode completes the preset number of cycles, Emergency mode

will automatically end and the transceiver will return to the channel that was in use

before Emergency mode was entered.

Note:

◆ Your dealer can set a beginning of transmit and end of transmit tone for the transceiver.

◆ Your dealer can set the transceiver to emit tones and received signals as normal or mute the

speaker during Emergency operation.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

No comments

Kenwood UHF P25 Transceiver TK-5810 User Manual Page 31