---------------------------------------------------------------^
---------------
Action I Value
Beep pattern
Press and hold PTT for 2 seconds j x 0
1 second tone
--------------------------------------------------------------
n
Press PTT 1 time x 1
•
Press PTT 2 times ! x 2
1
• •
Press PTT 3 times x 3
• • •
Press PTT 4 times
X 4
« ft • •
Press PTT 5 times
X 5
Press PTT 6 times
X 6
_
ft
Press PTT 7 times 1 x 7
— ft ft
Press PTT 8 times | x 8
— ft ft ft
Press PTT 9 times x 9
^ ft ft ft ft
Note:
♦
To select V’: press and hold the PTT switch
until a 1 second tone sounds (approximately
2 seconds).
Pressing the PTT switch more than 9 times
will cause an error tone to sound, and no
value will be selected. (If you set the 10s
digit to an error will occur after pressing
the PTT switch more than 8 times.)
1 Wait for 2 seconds to hear the
beep pattern of the Vs digit
number you selected.
8 Press the Monitor key to complete
the setting.
• The green LED blinks twice.
14
Comments to this Manuals