Kenwood KVT-524DVD User Manual download pdf (Page 3)

English

Connector Function Guide

Pin Numbers for

ISO Connectors

Cable Colour Functions

External Power

Connector

A-4 Yellow Battery

A-5 Blue/White Power Control

A-6 Orange/White Dimmer

A-7 Red Ignition (ACC)

A-8 Black Earth (Ground)

Connection

Speaker

Connector

B-1 Purple Rear Right (+)

B-2 Purple/Black Rear Right (–)

B-3 Gray Front Right (+)

B-4 Gray/Black Front Right (–)

B-5 White Front Left (+)

B-6 White/Black Front Left (–)

B-7 Green Rear Left (+)

B-8 Green/Black Rear Left (–)

2WARNING

Connecting the ISO Connector

The pin arrangement for the ISO connectors depends on

the type of vehicle you drive. Make sure to make the proper

connections to prevent damage to the unit.

The default connection for the wiring harness is described in

1 below. If the ISO connector pins are set as described in 2

or 3, make the connection as illustrated.

Please be sure to reconnect the cable as shown 2 below to

install this unit to the Volkswagen vehicles etc.

1 (Default setting) The A-7 pin of the vehicle’s ISO

connector is linked with the ignition, and the A-4

pin is connected to the constant power supply.

Unit Vehicle

A-7 Pin

A-4 Pin

Ignition cable (Red)

Battery cable (Yellow)

2 The A-7 pin of the vehicle’s ISO connector is

connected to the constant power supply, and the

A-4 pin is linked to the ignition.

Unit Vehicle

A-7 Pin

A-4 Pin

Ignition cable (Red)

Battery cable (Yellow)

3 The A-4 pin of the vehicle’s ISO connector is

not connected to anything, while the A-7 pin is

connected to the constant power supply (or both

the A-7 and A-4 pins are connected to the constant

power supply).

Unit Vehicle

A-7 Pin

A-4 Pin

Ignition cable (Red)

Battery cable (Yellow)

⁄

• When the connection is made as in 3 above, the unit’s

power will not be linked to the ignition key. For that reason,

always make sure to turn off the unit’s power when the

ignition is turned off.

To link the unit’s power to the ignition, connect the ignition

cable (ACC...red) to a power source that can be turned on

and off with the ignition key.

Connecting Wires to Terminals

B54-4700-00_00_English.indd 3B54-4700-00_00_English.indd 3 08.10.28 11:55:49 AM08.10.28 11:55:49 AM

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Kenwood KVT-524DVD User Manual Page 3

Comments to this Manuals

Related products and manuals for Multimedia Kenwood KVT-524DVD