Kenwood KRF-V8070D User Manual download pdf (Page 19)

ENGLISH

# Press the ∧ key or # key again to accept the setting.

• The subwoofer remix setting indication “SW RE-MIX” appears.

$ Use the MULTI CONTROL knob or Multi (%/ﬁ) keys to select

the appropriate subwoofer re-mix setting.

1 SW RE-MIX ON : Subwoofer re-mix setting mode to

the receiver is ON.

2 SW RE-MIX OFF : Subwoofer re-mix setting mode to

the receiver is OFF.

• If subwoofer is turned off, subwoofer re-mix setting is not visible.

% Press the SETUP key again to return to the main setup

displays.

• The receiver enters the speaker volume level adjustment mode.

• In steps 4 and 5, indications appear only for the selected

channels of the speakers that require adjusting.

Adjust the speaker volume level.

From your usual listening position, adjust the volume levels. The

volume levels from each speaker should be the same.

1 Press the ∧/∨ keys or @/#keys to select TEST TONE.

2 Press the SETUP key for the following displays:

1 T.TONE AUTO

2 T.TONE MANUAL

3 The selection of AUTO/MANUAL TEST TONE is done by the

MULTI CONTROL knob or Multi (%/ﬁ) keys.

Press the SETUP key again to begin TEST TONE.

Use the MULTI CONTROL knob or Multi (%/ﬁ) keys to adjust

the volume level of the test tone output from the speaker

channel to be adjusted.

For AUTO selection, the first test tone is heard from the front left

speaker for 2.5 seconds. The next test tone is heard from the

speakers in the following sequence for 2 seconds each.

LEFT CNTR RIGHT

SRSBSL

SUBW

The channel indication blinks while the test tone is being output.

SL S SB SR

SP MUTE

OPTICAL 6CH INPUT

COAXIAL ANALOG 96kHzfs

CINEMA EQ.

ACTIVE EQ.

DSP MODE

DTS.

MATRIX

DISCRETE

DOLBY DIGITAL

PRO LOGIC

STEREO

LOUDNESS

NEO:6

CSII

A B CLIP

AUTO DETECT THX

AUTO

RDS

RTY

MEMO

STEREO

TUNED

Surround EX

LFE

• If you change the volume level settings for the speakers while

listening to music, the settings referred to on this page are also

changed. ‹

• If the speaker setting selects are OFF, the speaker level settings

are reset.

For MANUAL selection, press the ∧/∨ keys or @/# keys each

time to select the speaker channel.

4 Press the SETUP key again.

• The test tone is turned off and return to the main setup displays.

Input the distance to the speakers.

1 Press the ∧/∨ keys or @/# keys to select the SP DISTANCE

on setup displays and press the SETUP key again.

Preparing for surround sound

8 Use the MULTI CONTROL knob or Multi (%/ﬁ) to select the

appropriate surround speaker setting.

If you selected “LARGE” as the center speaker setting,

1 SURR LARGE : Large surround speakers are

connected to the receiver.

2 SURR NORMAL : Average size surround speakers are

connected to the receiver.

3 SURR OFF : Surround speaker setting mode to

the receiver is OFF.

If you selected other than “LARGE” as the center speaker setting,

1 SURR ON : Surround speaker setting mode to the

receiver is ON.

2 SURR OFF : Surround speaker setting mode to the

receiver is OFF.

• When the setting “SURR OFF” is selected, the procedure skips

to step #.

9 Press the ∧ key or # keys again to accept the setting.

• The surround speaker setting indication “SB” appears.

0 Use the MULTI CONTROL knob or Multi (%/ﬁ) keys to select

appropriate surround back speaker setting.

If you selected “LARGE” as the surround speaker setting,

1 SB NORMAL : Average size surround back speaker is

connected to the receiver.

2 SB LARGE : Large surround back speaker is

connected to the receiver.

3 SB OFF : Surround back speaker setting mode to

the receiver is OFF.

SL S SB SR

SP MUTE

OPTICAL 6CH INPUT

COAXIAL ANALOG 96kHzfs

CINEMA EQ.

ACTIVE EQ.

DSP MODE

DTS.

MATRIX

DISCRETE

DOLBY DIGITAL

PRO LOGIC

STEREO

LOUDNESS

NEO:6

CSII

A B CLIP

AUTO DETECT THX

AUTO

RDS

RTY

MEMO

STEREO

TUNED

Surround EX

LFE

If you selected “NORMAL” as the surround speaker setting,

1 SB ON : Surround back speaker setting mode to the

receiver is ON.

2 SB OFF : Surround back speaker setting mode to the

receiver is OFF.

• After setting SB (surround back) from OFF to ON, 6ch AMP setup

display will appear to enable you to re-select either SW or SB from

the surround back or subwoofer speaker terminal.

! Press the ∧ key or # key again to accept the setting and

“SURR:MIX” appears.

• Surr:mix is when the SL and SR speakers signals are mixed to

produce sound from the surround back speaker which would

enable the listener to enjoy sound coming from the back.

SL S SB SR

SP MUTE

OPTICAL 6CH INPUT

COAXIAL ANALOG 96kHzfs

CINEMA EQ.

ACTIVE EQ.

DSP MODE

DTS.

MATRIX

DISCRETE

DOLBY DIGITAL

PRO LOGIC

STEREO

LOUDNESS

NEO:6

CSII

A B CLIP

AUTO DETECT THX

AUTO

RDS

RTY

MEMO

STEREO

TUNED

Surround EX

LFE

@ Use the MULTI CONTROL knob or Multi (%/ﬁ) keys to select

the following.

1 SURR:MIX ON : Surround mix setting mode to the

receiver is ON.

2 SURR:MIX OFF : Surround mix setting mode to the

receiver is OFF.

• If surround back speaker is turned off, SURR:MIX setting is not

visible and the procedure skips to step #.

Continued to next page

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Comments to this Manuals

No comments

Kenwood KRF-V8070D User Manual Page 19

Comments to this Manuals

Related products and manuals for Home Theater Systems Kenwood KRF-V8070D