Kenwood DNX7210BT User Manual download pdf (Page 42)

8282 83

Return to the Top page

Audio Setting Up

Return to the Top page

Audio Setting Up

NOTE

• Eachoperationinthissectioncanbestartedfrom

themultifunctionmenu.

Youcanadjustthevarioussettingssuchas

audiobalanceorsubwooferlevel.

1

Touch [Menu] on any screen.

2

Touch [Audio].

Audio screen appears.

See the following section for each setting.

• Setting audio (P.82)

• Controlling audio (P.86)

• Controlling equalizer (P.87)

• Performing zone control (P.89)

• Set space enhancer

(P.89)

• Set listening position

(P.90)

Setting Audio

1

Touch [Audio SETUP].

Audio SETUP screen appears.

See the following section for each setting.

• Set up speakers (P.82)

• Set up your car type (P.84)

• Select DSP

(P.85)

• Set up elevation (P.85)



Speaker Select screen appears.

• Set up speakers (P.82)

Speaker setup

Youcanselectaspeakertypeanditssizeto

getthebestsoundeffects.

Whenthespeakertypeandsizeareset,

thespeakercrossovernetworkisset

automatically.

1

Touch [Speaker Select] in the Audio

SETUP screen.

Speaker Select screen appears.

2

Touch the speaker you wish to adjust

and set each item as follows.

Controlling Audio

Subwoofer

Selectifyouareusingasubwoofer.

Tweeter

Youcansetthetweeterwhenyouare

selectingfrontspeakers.

Ifyouareusingatweetertogetherwiththe

frontspeakers,setthetweeterto“ON”.

X’over

Displaysthespeakercrossoversetupscreen.

Youcanadjustthecrossoversetupthatwasset

automaticallywhenyouselectedthespeaker

type.

Fordetails,seeCrossover network setup

(P.83)

3

Select a speaker size using [2] and

[3]. The speaker size is different

depending on the speaker type and

the unit.

Front

OEM,8cm,10cm,12cm,13cm,16cm,17cm,

18cm,4x6,5x7,6x8,6x9,7x10

Rear

None,OEM,8cm,10cm,12cm,13cm,16cm,

17cm,18cm,4x6,5x7,6x8,6x9,7x10

Subwoofer

None,16cm,20cm,25cm,30cm,38cmover

NOTE

• Select“None”ifyouhavenospeakers.



Front

Standard,Wide,Middle,Narrow

Crossover network setup

Youcansetacrossoverfrequencyof

speakers.

1

Touch the speaker to set the crossover

in the Speaker Select screen.

2

Touch [X’over].

X’over screen appears.

3

Set each item as follows.

Phase*

Setsthephaseofsubwooferoutput.

Thephaseisreversed180degreeswhensetto

“Reverse”.

HPF FREQ

HighPassFilteradjustment.(Whenfrontorrear

speakerisselectedonSpeakerSelectscreen)

LPF FREQ

LowPassFilteradjustment.(Whensubwoofer

isselectedonSpeakerSelectscreen)

Slope

Setsacrossoverslope.

*Thisfunctionisavailableinthespecific

situation.

Onlywhen“Subwoofer”issetto

otherthan“None”in“SpeakerSetup”.

 Onlywhen“Subwoofer”is

setto“ON”in“SpeakerSetup”and“LPF

FREQ”issettootherthan“Through”.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 57 58

Comments to this Manuals

No comments