Kenwood DDX8022BT User Manual download pdf (Page 6)

DNX8220BT/DDX8022BT

Connecting Wires to Terminals

Connector Function Guide

Pin Numbers for

ISO Connectors

Cable Colour Functions

External Power

Connector

A-4 Yellow Battery

A-5 Blue/White Power Control

A-6 Orange/White Dimmer

A-7 Red Ignition (ACC)

A-8 Black Earth (Ground)

Connection

Speaker

Connector

B-1 Purple Rear Right (+)

B-2 Purple/Black Rear Right (–)

B-3 Gray Front Right (+)

B-4 Gray/Black Front Right (–)

B-5 White Front Left (+)

B-6 White/Black Front Left (–)

B-7 Green Rear Left (+)

B-8 Green/Black Rear Left (–)

2WARNING

Connecting the ISO Connector

The pin arrangement for the ISO connectors depends on

the type of vehicle you drive. Make sure to make the proper

connections to prevent damage to the unit.

The default connection for the wiring harness is described in

1 below. If the ISO connector pins are set as described in 2,

make the connection as illustrated.

Please be sure to reconnect the cable as shown 2 below to

install this unit to the Volkswagen vehicles etc.

1 (Default setting) The A-7 pin (red) of the vehicle’s

ISO connector is linked with the ignition, and the A-

4 pin (yellow) is connected to the constant power

supply.

Unit Vehicle

A-7 Pin (Red)

A-4 Pin (Yellow)

Ignition cable (Red)

Battery cable (Yellow)

2 The A-7 pin (red) of the vehicle’s ISO connector is

connected to the constant power supply, and the

A-4 pin (yellow) is linked to the ignition.

Unit Vehicle

A-7 Pin (Red)

A-4 Pin (Yellow)

Ignition cable

(Red)

Battery cable

(Yellow)

B54-4650-00_00_EN.indd 6B54-4650-00_00_EN.indd 6 08.2.19 4:12:01 PM08.2.19 4:12:01 PM

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Kenwood DDX8022BT User Manual Page 6

Comments to this Manuals

Related products and manuals for GPS receiver Kenwood DDX8022BT