Kenwood DPX-6020 User Manual download pdf (Page 3)

— 3 —

To prevent injury or fire, take the following

precautions:

• Insert the unit all the way in until it is fully locked in

place. Otherwise it may fall out of place when

jolted.

• When extending the ignition, battery, or ground

wires, make sure to use automotive-grade wires or

other wires with a 0.75mm

(AWG18) or more to

prevent wire deterioration and damage to the wire

coating.

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

• If the unit starts to emit smoke or strange smells,

turn off the power immediately and consult your

Kenwood dealer.

• Make sure not to get your fingers caught between

the faceplate and the unit.

• Be careful not to drop the unit or subject it to strong

shock.

The unit may break or crack because it contains

glass parts.

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V DC

power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

• Do not subject the faceplate to excessive shock, as

it is a piece of precision equipment.

2CAUTION

2WARNING

• When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

• To prevent a short circuit when replacing a fuse,

first disconnect the wiring harness.

• Do not place any object between the faceplate and

the unit.

• Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could

damage the unit.

IMPORTANT INFORMATION

About the disc changer to be connected:

To connect a disc changer having the "O-N" switch

to this unit, set the "O-N" switch to "N".

When you connect a model with no "O-N" switch,

the converter cord CA-DS100 available as an option

may be required. For details, consult your Kenwood

dealer.

If a model with no "O-N" switch is connected, some

unavailable functions and information that cannot be

displayed are generated, such as the DNPS, DNPP,

Magazine random play, and CD Text display.

Note that none of the KDC-C100, KDC-C302, C205,

C705, and non-Kenwood CD changers can be

connected.

You can damage both your unit and the CD

changer if you connect them incorrectly.

The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may represent

something impossible in actual operation.

NOTE

2CAUTION

• CD-Rs and CD-RWs which have not undergone

finalization processing cannot be played. (For more

information on finalization processing, refer to the

manual for your CD-R/CD-RW writing software or

CD-R/CD-RW recorder.) Additionally, depending on

the recording status, it may prove impossible to

play certain CDs recorded on CD-R or CD-RW.

• If you experience problems during installation,

consult your Kenwood dealer.

• If the unit does not seem to be working right, try

pressing the reset button first. If that does not solve

the problem, consult your Kenwood dealer.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe neutral detergent off.

Applying spray cleaner directly to the unit may

affect its mechanical parts. Wiping the front panel

with a hard cloth or using a volatile liquid such as

thinner or alcohol may scratch the surface or

erases characters.

2CAUTION

NOTE

Safety precautions

DISP

Reset button

DPX-6020_K_U.S 01.12.25 1:57 PM Page 3

1 2 3 4 5 6 7 8 ... 45 46

Comments to this Manuals

No comments

Kenwood DPX-6020 User Manual Page 3

Comments to this Manuals

Related products and manuals for Cassette Decks Kenwood DPX-6020