Kenwood LZ-612IR User Manual download pdf (Page 2)

LZ-612IR

WARNING

To prevent injury or re, take the following

precautions:

• Topreventashortcircuit,neverputorleaveany

metallic objects (such as coins or metal tools) inside

the unit.

• Donotwatchorfixyoureyesontheunit’sdisplay

whenyouaredrivingforanyextendedperiod.

• Mountingandwiringthisproductrequiresskillsand

experience.Forsafety’ssake,leavethemounting

and wiring work to professionals.

• DonottouchtheliquidcrystalfluidiftheLCDis

damagedorbrokenduetoshock.Theliquidcrystal

fluid may be dangerous to your health or even fatal.

 IftheliquidcrystalfluidfromtheLCDcontactsyour

body or clothing, wash it off with soap immediately.

• Thismonitorunitissetforrearpassengeruseonly.

Use of this monitor unit in any front seat and/or

where it may be visible to the driver may be illegal

in some states and may cause driver distraction and

accident, resulting in injury or death.

CAUTION

To prevent damage to the machine, take

the following precautions:

• Makesuretogroundtheunittoanegative12VDC

power supply.

• Donotinstalltheunitinaspotexposedtodirect

sunlightorexcessiveheatorhumidity.Alsoavoid

places with too much dust or the possibility of

water splashing.

• Whenreplacingafuse,onlyuseanewfusewith

the prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

• Donotuseyourownscrews.Useonlythescrews

provided. If you use the wrong screws, you could

damage the unit.

How to Reset Your Unit

• Iftheunitfailstooperateproperly,presstheReset

button.Theunitreturnstofactorysettingswhenthe

Reset button is pressed.

Reset button

• EveniftheResetbuttonispressed,valuesset

forindividualitemsarenotcleared.Toinitialize

set values, perform the operation mentioned in

<Settings> (page 6).

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with

a cloth moistened with neutral cleaner, then wipe it

again with a clean soft dry cloth.

• Applyingspraycleanerdirectlytotheunitmayaffectits

mechanicalparts.Wipingthefaceplatewithahardclothor

usingavolatileliquidsuchasthinneroralcoholmayscratch

the surface or erases characters.

Screen brightness during low temperatures

Whenthetemperatureoftheunitfallssuchasduring

winter,theliquidcrystalpanel’sscreenwillbecome

darker than usual. Normal brightness will return after

using the monitor for a while.

• Ifyouexperienceproblemsduringinstallation,

consult your Kenwood dealer.

• Whenyoupurchaseoptionalaccessories,checkwith

your Kenwood dealer to make sure that they work

with your model and in your area.

• Theillustrationsofthedisplayandthepanel

appearinginthismanualareexamplesusedto

explainmoreclearlyhowthecontrolsareused.

Therefore,whatappearsonthedisplayinthe

illustrations may differ from what appears on the

displayontheactualequipment,andsomeofthe

illustrations on the display may represent something

impossible in actual operation.

Protecting the monitor

Toprotectthemonitorfromdamage,donotoperate

the monitor using a ball point pen or similar tool with

the sharp tip.

Safety precautions Notes

1-LZ-612IR_ENG_0405.indd 2 2010-04-05 �� 5:11:57

1 2 3 4 5 6 7 ... 10 11

Comments to this Manuals

No comments

Kenwood LZ-612IR User Manual Page 2

Comments to this Manuals

Related products and manuals for Car video systems Kenwood LZ-612IR