Kenwood DPX313 User Manual download pdf (Page 10)

DPX503U/DPX303/DPX313

Display Settings

Function of DPX503U

Illumination Color Selection

Selecting the Illumination Color of the panel.

1 Enter Illumination Color Selection mode

Select “Color” .

For how to select Function Control item, refer to

<Function Control> (page 6).

2 Select the place where you want to set the

Illumination Color

Place Display

All “All Color”

Display “Display Color”

Button “Key Color”

Volume knob “Left Knob Color”

Control konb “Right Knob Color”

Save and recall the Illumination Colors you selected

for each place

“Color Preset”

Turn the Control knob and push the center

when the desired item is displayed.

3 Select the Illumination Color

Turn the Control knob and push the center

when the desired item is displayed.

Select the color from “Variable Scan”/ “Color1”

— “Color 10”/ “User”.

Creating “User” color

You can create your original color during the

selection from “Color1” — “Color10.”

The color you created can be called when you

select “User”.

1. Press the Control knob for at least 1 second.

Enter the detail color adjustment mode.

2. Set the color.

Operation type Operation

To select the color to adjust.

(red, green, or blue)

Push the Control knob towards

right or left.

To adjust color. (Range: 0 – 9) Turn the Control knob or push it

towards up or down.

3. Press the Control knob.

Exit the detail color adjustment mode.

4 Exit Key Color Selection mode

Press the [FNC] button.

⁄

• When you select “PRESET”, you can save the combination

of the Illumination Colors selected for each place. For

how to save Illumination Colors, refer to <Illumination

Color Preset Memory> (page 10).

Function of DPX503U

Illumination Color Preset Memory

Saving the combination of the Illumination Colors

selected for each place. The memory cannot be

erased by the Reset button.

1 Set the Illumination Color for each place

Refer to <Illumination Color Selection> (page 10).

2 Enter Illumination Color Preset Memory mode

Select “COLOR” > “PRESET” > “MEMO”.

For how to select Function Control item, refer to

<Function Control> (page 6).

3 Put the Illumination Color Preset in the

memory

Press the Control knob.

“Memory?” is displayed.

4 Turn the Control knob to select “YES”, and then

press the Control knob.

“Memory Completed” is displayed.

5 Exit Illumination Color Preset mode

Press the [FNC] button.

⁄

• Register 1 pair of Illumination Color Preset Memory.

• If you press the Reset button, the value in the memory

will be default setting value of “Illumination Color

Selection.”

B64-4227-00_00_DPX503U_En.indd 10B64-4227-00_00_DPX503U_En.indd 10 08.7.7 2:02:08 PM08.7.7 2:02:08 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Kenwood DPX313 User Manual Page 10

Comments to this Manuals

Related products and manuals for Car media receivers Kenwood DPX313