Kenwood DNX571HD Instruction Manual download pdf (Page 107)

106106

Return to the Top page

Setting Up

AV Output Interface Setup

You can select an AV source to be output at

the AV OUTPUT port. Default is “VIDEO1”.

1 Touch [Menu] on any screen.

2 Touch [SETUP].

SETUP Menu screen appears.

3 Touch [AV-OUT].

AV-OUT Interface screen appears.

4 Touch [2] or [3] to set [AV-OUT] to

VIDEO1, DISC, iPod, USB, or OFF.

NOTE

• Only when iPod is connected to this unit with

KCA-iP202, “USB” can be selected as AV output

source. For the connection setting, refer to iPod/

iPhone connection setup (P.56).

External Device Control

(DNX891HD, DNX7710BT only)

Control the external device power supply.

1 Touch [EXT SW] in the Source Control

screen.

EXT SW Control screen appears.

NOTE

• If [EXT SW] is not displayed, touch [ ].

2 Touch the desired switch key.

You can turn on or off the external device

power supply.

NOTE

• You must connect a commercially available relay

unit in order to use this function. Connect the

external device to be controlled to that relay unit.

• See EXT SW setup (P.98) for information on

setting the power on or off specification.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 144 145

No comments

Kenwood DNX571HD Instruction Manual Page 107