Kenwood KAC-X501F User Manual download pdf (Page 2)

Safety precautions

AWARNING

NOTE

To prevent injury or fire, take the foHowing

precautions:

• When extending the ignition, battery, or

ground wires, make sure to use automotive-

grade wires or other wires with a 10 mm^

(AWG8) 15 mm^ (AWGIO) x 21 or more to

prevent wire deterioration and damage to the

wire coating.

•To prevent a short circuit, never put or leave

any metallic objects (such as coins or metai

tools) inside the unit.

• If the unit starts to emit smoke or strange

smells, turn off the power immediately and

consult your Kenwood dealer.

• Do not touch the unit during use because the

surface of the unit becomes hot and may

cause burns if touched.

ACAUTION

To prevent damage to the machine, take the

fotiowing precautions:

• Be sure the unit is connected to a 12V DC

power supply with a negative ground

connection.

• Do not open the top or bottom covers of the

unit.

• Do not install the unit in a spot exposed to

direct sunlight or excessive heat or humidity.

Also avoid places with too much dust or the

possibility of water splashing.

• When replacing a fuse, only use a new one

with the prescribed rating. Using a fuse with

the wrong rating may cause your unit to

malfunction.

• To prevent a short circuit when replacing a

fuse, first disconnect the wiring harness.

• If you experience problems during

installation, consult your Kenwood dealer.

• If the unit does not seem to be working right,

consult your Kenwood dealer.

Cleaning the unit

If the front panel gets dirty, turn off the power

and wipe the panel with a dry silicon cloth or

soft cloth.

ACAUTION

Do not wipe the panel with a hard cloth or a

cloth dampened by volatile solvents such as

paint thinner and alcohol. They can scratch the

surface of the panel and/or cause the indicator

letters to peel off.

FCC WARNING

This equipment may generate or use radio

frequency energy. Changes or modifications

to this equipment may cause harmful

interference unless the modification's are

expressly approved in the instruction manual.

The user could lose the authority to operate

this equipment if an unauthorized change or

modification is made.

Accessories

Part name

External

View

Number of

Items

Terminal cover

(Power terminal)

Self-tapping screws

(05 X 18 mm)

0D33B>

Installation procedure

Since there are large variety of settings and

connections possible according to applications,

read the instruction manual well to select the

proper setting and connection.

1. Remove the ignition key and disconnect the

negative 0 terminal of the battery to

prevent short circuits.

2. Set the unit according to the intended usage.

3. Connect the input and output cables of the

units.

4. Connect the speaker wires.

5. Connect the power wire, power control wire

and grounding wire following this order.

6. install the unit in the car.

7. Connect the negative 0 terminal of the

battery.

^ f:nrtlich

ACAUTION

• Be sure to turn the power off before

changing the setting of any switch.

• If the fuse blows, check wires for shorts,

then replace the fuse with one of the same

rating.

• Check that no unconnected cables or

connectors are touching the car body. Do

not remove caps from unconnected cables

or connectors to prevent short circuits.

• Connect the speaker wires tÿ appropriate

speaker connectors separately. Sharing the

negative wire of the speaker or grounding

speaker wires to the metal body Of the car

can cause this unit to fail.

• After installation, check that the brake

lamps, winkers, and wipers work properly.

1 2 3 4 5 6 7 ... 14 15

Comments to this Manuals

No comments

Kenwood KAC-X501F User Manual Page 2

Comments to this Manuals